Files
eternalwrt-mt798x/target/linux/realtek/dts/rtl9302_plasmacloud_common.dtsi
T
Markus StockhausenandRobert Marko d7de7cae1a realtek: dts: convert devices to PHY_C45()
Make the remaining devices use the new PHY_C45() macro. At least
those that have no extra attributes in the phy definitions.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22715
Signed-off-by: Robert Marko <robimarko@gmail.com>
2026-04-01 14:12:14 +02:00

213 lines
4.0 KiB
Devicetree

// SPDX-License-Identifier: GPL-2.0-or-later
#include "rtl930x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
chosen {
/* get active mtdparts from u-boot */
/delete-property/ bootargs;
};
aliases {
led-boot = &led_power;
led-running = &led_power;
led-failsafe = &led_power;
led-upgrade = &led_power;
label-mac-device = &ethernet0;
};
keys {
compatible = "gpio-keys";
mode {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
i2c0: i2c-gpio0 {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
sda-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <5>; /* ~100 kHz */
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_disable_sys_led>;
led_power: led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-1 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
led_set: led_set@0 {
compatible = "realtek,rtl9300-leds";
active-low;
led_set0 = <(RTL93XX_LED_SET_10G | RTL93XX_LED_SET_5G |
RTL93XX_LED_SET_2P5G | RTL93XX_LED_SET_1G |
RTL93XX_LED_SET_100M | RTL93XX_LED_SET_10M |
RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xe0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x10000>;
nvmem-layout {
compatible = "u-boot,env";
macaddr_ubootenv_ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};
};
partition@f0000 {
label = "u-boot-env2";
reg = <0xf0000 0x10000>;
};
partition@100000 {
label = "firmware1";
reg = <0x100000 0xf80000>;
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x93000000>;
};
partition@1080000 {
label = "firmware2";
reg = <0x1080000 0xf80000>;
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x93000000>;
};
};
};
};
&ethernet0 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 0>;
nvmem-cell-names = "mac-address";
};
&mdio_bus0 {
PHY_C45(0, 0)
PHY_C45(1, 1)
PHY_C45(2, 2)
PHY_C45(3, 3)
PHY_C45(8, 4)
PHY_C45(9, 5)
PHY_C45(10, 6)
PHY_C45(11, 7)
};
&switch0 {
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT_SDS(0, 1, 2, 10g-qxgmii)
SWITCH_PORT_SDS(1, 2, 2, 10g-qxgmii)
SWITCH_PORT_SDS(2, 3, 2, 10g-qxgmii)
SWITCH_PORT_SDS(3, 4, 2, 10g-qxgmii)
SWITCH_PORT_SDS(8, 5, 3, 10g-qxgmii)
SWITCH_PORT_SDS(9, 6, 3, 10g-qxgmii)
SWITCH_PORT_SDS(10, 7, 3, 10g-qxgmii)
SWITCH_PORT_SDS(11, 8, 3, 10g-qxgmii)
/* CPU-port */
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&port0 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 1>;
nvmem-cell-names = "mac-address";
};
&port1 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 2>;
nvmem-cell-names = "mac-address";
};
&port2 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 3>;
nvmem-cell-names = "mac-address";
};
&port3 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 4>;
nvmem-cell-names = "mac-address";
};
&port8 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 5>;
nvmem-cell-names = "mac-address";
};
&port9 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 6>;
nvmem-cell-names = "mac-address";
};
&port10 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 7>;
nvmem-cell-names = "mac-address";
};
&port11 {
nvmem-cells = <&macaddr_ubootenv_ethaddr 8>;
nvmem-cell-names = "mac-address";
};