eternalwrt/eternalwrt-mt798x
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
57ab0de3e69662b9aa0a9d3484749ef084f0f312
eternalwrt-mt798x/package/libs/openssl/Makefile
T
Tianling Shen 39450cf769 openssl: bump to 3.0.9 
Changes between 3.0.8 and 3.0.9 [30 May 2023]

 * Mitigate for the time it takes for `OBJ_obj2txt` to translate gigantic
   OBJECT IDENTIFIER sub-identifiers to canonical numeric text form.

   OBJ_obj2txt() would translate any size OBJECT IDENTIFIER to canonical
   numeric text form.  For gigantic sub-identifiers, this would take a very
   long time, the time complexity being O(n^2) where n is the size of that
   sub-identifier.  ([CVE-2023-2650])

   To mitigitate this, `OBJ_obj2txt()` will only translate an OBJECT
   IDENTIFIER to canonical numeric text form if the size of that OBJECT
   IDENTIFIER is 586 bytes or less, and fail otherwise.

   The basis for this restriction is RFC 2578 (STD 58), section 3.5. OBJECT
   IDENTIFIER values, which stipulates that OBJECT IDENTIFIERS may have at
   most 128 sub-identifiers, and that the maximum value that each sub-
   identifier may have is 2^32-1 (4294967295 decimal).

   For each byte of every sub-identifier, only the 7 lower bits are part of
   the value, so the maximum amount of bytes that an OBJECT IDENTIFIER with
   these restrictions may occupy is 32 * 128 / 7, which is approximately 586
   bytes.

   Ref: https://datatracker.ietf.org/doc/html/rfc2578#section-3.5

   *Richard Levitte*

 * Fixed buffer overread in AES-XTS decryption on ARM 64 bit platforms which
   happens if the buffer size is 4 mod 5 in 16 byte AES blocks. This can
   trigger a crash of an application using AES-XTS decryption if the memory
   just after the buffer being decrypted is not mapped.
   Thanks to Anton Romanov (Amazon) for discovering the issue.
   ([CVE-2023-1255])

   *Nevine Ebeid*

 * Reworked the Fix for the Timing Oracle in RSA Decryption ([CVE-2022-4304]).
   The previous fix for this timing side channel turned out to cause
   a severe 2-3x performance regression in the typical use case
   compared to 3.0.7. The new fix uses existing constant time
   code paths, and restores the previous performance level while
   fully eliminating all existing timing side channels.
   The fix was developed by Bernd Edlinger with testing support
   by Hubert Kario.

   *Bernd Edlinger*

 * Corrected documentation of X509_VERIFY_PARAM_add0_policy() to mention
   that it does not enable policy checking. Thanks to David Benjamin for
   discovering this issue.
   ([CVE-2023-0466])

   *Tomáš Mráz*

 * Fixed an issue where invalid certificate policies in leaf certificates are
   silently ignored by OpenSSL and other certificate policy checks are skipped
   for that certificate. A malicious CA could use this to deliberately assert
   invalid certificate policies in order to circumvent policy checking on the
   certificate altogether.
   ([CVE-2023-0465])

   *Matt Caswell*

 * Limited the number of nodes created in a policy tree to mitigate
   against CVE-2023-0464.  The default limit is set to 1000 nodes, which
   should be sufficient for most installations.  If required, the limit
   can be adjusted by setting the OPENSSL_POLICY_TREE_NODES_MAX build
   time define to a desired maximum number of nodes or zero to allow
   unlimited growth.
   ([CVE-2023-0464])

   *Paul Dale*

Removed upstreamed patches.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 03e1f2cc2a)
2023-06-02 19:52:51 +08:00

440 lines
13 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=openssl
PKG_VERSION:=3.0.9
PKG_RELEASE:=1
PKG_BUILD_FLAGS:=no-mips16 gc-sections
PKG_BUILD_PARALLEL:=1
PKG_BASE:=$(subst $(space),.,$(wordlist 1,2,$(subst .,$(space),$(PKG_VERSION))))
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:= \
https://mirrors.tencent.com/openssl/source/ \
https://mirrors.tencent.com/openssl/source/old/$(PKG_BASE)/ \
https://www.openssl.org/source/ \
https://www.openssl.org/source/old/$(PKG_BASE)/ \
https://ftp.fi.muni.cz/pub/openssl/source/ \
https://ftp.fi.muni.cz/pub/openssl/source/old/$(PKG_BASE)/ \
ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/ \
ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/old/$(PKG_BASE)/
PKG_HASH:=eb1ab04781474360f77c318ab89d8c5a03abc38e63d65a603cabbf1b00a1dc90
PKG_LICENSE:=Apache-2.0
PKG_LICENSE_FILES:=LICENSE
PKG_MAINTAINER:=Eneas U de Queiroz <cotequeiroz@gmail.com>
PKG_CPE_ID:=cpe:/a:openssl:openssl
PKG_CONFIG_DEPENDS:= \
CONFIG_OPENSSL_ENGINE \
CONFIG_OPENSSL_ENGINE_BUILTIN \
CONFIG_OPENSSL_ENGINE_BUILTIN_AFALG \
CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO \
CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK \
CONFIG_OPENSSL_NO_DEPRECATED \
CONFIG_OPENSSL_OPTIMIZE_SPEED \
CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM \
CONFIG_OPENSSL_SMALL_FOOTPRINT \
CONFIG_OPENSSL_WITH_ARIA \
CONFIG_OPENSSL_WITH_ASM \
CONFIG_OPENSSL_WITH_ASYNC \
CONFIG_OPENSSL_WITH_BLAKE2 \
CONFIG_OPENSSL_WITH_CAMELLIA \
CONFIG_OPENSSL_WITH_CHACHA_POLY1305 \
CONFIG_OPENSSL_WITH_CMS \
CONFIG_OPENSSL_WITH_COMPRESSION \
CONFIG_OPENSSL_WITH_DTLS \
CONFIG_OPENSSL_WITH_EC2M \
CONFIG_OPENSSL_WITH_ERROR_MESSAGES \
CONFIG_OPENSSL_WITH_IDEA \
CONFIG_OPENSSL_WITH_MDC2 \
CONFIG_OPENSSL_WITH_NPN \
CONFIG_OPENSSL_WITH_PSK \
CONFIG_OPENSSL_WITH_RFC3779 \
CONFIG_OPENSSL_WITH_SEED \
CONFIG_OPENSSL_WITH_SM234 \
CONFIG_OPENSSL_WITH_SRP \
CONFIG_OPENSSL_WITH_SSE2 \
CONFIG_OPENSSL_WITH_TLS13 \
CONFIG_OPENSSL_WITH_WHIRLPOOL
include $(INCLUDE_DIR)/package.mk
include $(INCLUDE_DIR)/openssl-module.mk
ifneq ($(CONFIG_CCACHE),)
HOSTCC=$(HOSTCC_NOCACHE)
HOSTCXX=$(HOSTCXX_NOCACHE)
endif
define Package/openssl/Default
TITLE:=Open source SSL toolkit
URL:=http://www.openssl.org/
SECTION:=libs
CATEGORY:=Libraries
endef
define Package/libopenssl/config
source "$(SOURCE)/Config.in"
endef
define Package/openssl/Default/description
The OpenSSL Project is a collaborative effort to develop a robust,
commercial-grade, full-featured, and Open Source toolkit implementing the
Transport Layer Security (TLS) protocol as well as a full-strength
general-purpose cryptography library.
endef
define Package/libopenssl
$(call Package/openssl/Default)
SUBMENU:=SSL
DEPENDS:=+OPENSSL_WITH_COMPRESSION:zlib \
+OPENSSL_ENGINE_BUILTIN_AFALG:kmod-crypto-user \
+OPENSSL_ENGINE_BUILTIN_DEVCRYPTO:kmod-cryptodev \
+OPENSSL_ENGINE_BUILTIN_PADLOCK:kmod-crypto-hw-padlock \
+(arm||armeb||mips||mipsel||powerpc||arc):libatomic
TITLE+= (libraries)
ABI_VERSION:=$(firstword $(subst .,$(space),$(PKG_VERSION)))
MENU:=1
endef
define Package/libopenssl/description
$(call Package/openssl/Default/description)
This package contains the OpenSSL shared libraries, needed by other programs.
endef
define Package/openssl-util
$(call Package/openssl/Default)
SECTION:=utils
CATEGORY:=Utilities
DEPENDS:=+libopenssl +libopenssl-conf
TITLE+= (utility)
endef
define Package/openssl-util/description
$(call Package/openssl/Default/description)
This package contains the OpenSSL command-line utility.
endef
define Package/libopenssl-conf
$(call Package/openssl/Default)
SUBMENU:=SSL
TITLE:=/etc/ssl/openssl.cnf config file
DEPENDS:=libopenssl
endef
define Package/libopenssl-conf/conffiles
/etc/ssl/openssl.cnf
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),/etc/ssl/modules.cnf.d/devcrypto.cnf)
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK),/etc/ssl/modules.cnf.d/padlock.cnf)
endef
define Package/libopenssl-conf/description
$(call Package/openssl/Default/description)
This package installs the OpenSSL configuration file /etc/ssl/openssl.cnf.
endef
ifneq ($(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK)$(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),)
define Package/libopenssl-conf/postinst
#!/bin/sh
add_engine_config() {
if [ -z "$${IPKG_INSTROOT}" ] && uci -q get "openssl.$$1" >/dev/null; then
[ "$$(uci -q get "openssl.$$1.builtin")" = 1 ] && return
uci set "openssl.$$1.builtin=1" && uci commit openssl
return
fi
}
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),add_engine_config devcrypto)
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK),add_engine_config padlock)
endef
endif
$(eval $(call Package/openssl/add-provider,legacy))
define Package/libopenssl-legacy
$(call Package/openssl/Default)
$(call Package/openssl/module/Default)
TITLE:=OpenSSL legacy provider
endef
define Package/libopenssl-legacy/description
The OpenSSL legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy. Such algorithms have commonly fallen out of use, have
been deemed insecure by the cryptography community, or something similar. See
https://www.openssl.org/docs/man3.0/man7/OSSL_PROVIDER-legacy.html
endef
$(eval $(call Package/openssl/add-engine,afalg))
define Package/libopenssl-afalg
$(call Package/openssl/Default)
$(call Package/openssl/engine/Default)
TITLE:=AFALG hardware acceleration engine
DEPENDS += @KERNEL_AIO +PACKAGE_libopenssl-afalg:kmod-crypto-user \
@!OPENSSL_ENGINE_BUILTIN
endef
define Package/libopenssl-afalg/description
This package adds an engine that enables hardware acceleration
through the AF_ALG kernel interface.
See https://www.openssl.org/docs/man3.0/man5/config.html#Engine-Configuration
and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
The engine_id is "afalg"
endef
$(eval $(call Package/openssl/add-engine,devcrypto))
define Package/libopenssl-devcrypto
$(call Package/openssl/Default)
$(call Package/openssl/engine/Default)
TITLE:=/dev/crypto hardware acceleration engine
DEPENDS += +PACKAGE_libopenssl-devcrypto:kmod-cryptodev @!OPENSSL_ENGINE_BUILTIN
endef
define Package/libopenssl-devcrypto/description
This package adds an engine that enables hardware acceleration
through the /dev/crypto kernel interface.
See https://www.openssl.org/docs/man3.0/man5/config.html#Engine-Configuration
and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
The engine_id is "devcrypto"
endef
$(eval $(call Package/openssl/add-engine,padlock))
define Package/libopenssl-padlock
$(call Package/openssl/Default)
$(call Package/openssl/engine/Default)
TITLE:=VIA Padlock hardware acceleration engine
DEPENDS += @TARGET_x86 +PACKAGE_libopenssl-padlock:kmod-crypto-hw-padlock \
@!OPENSSL_ENGINE_BUILTIN
endef
define Package/libopenssl-padlock/description
This package adds an engine that enables VIA Padlock hardware acceleration.
See https://www.openssl.org/docs/man3.0/man5/config.html#Engine-Configuration
and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
The engine_id is "padlock"
endef
OPENSSL_OPTIONS:= shared no-tests
ifndef CONFIG_OPENSSL_WITH_BLAKE2
OPENSSL_OPTIONS += no-blake2
endif
ifndef CONFIG_OPENSSL_WITH_CHACHA_POLY1305
OPENSSL_OPTIONS += no-chacha no-poly1305
else
ifdef CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM
OPENSSL_OPTIONS += -DOPENSSL_PREFER_CHACHA_OVER_GCM
endif
endif
ifndef CONFIG_OPENSSL_WITH_ASYNC
OPENSSL_OPTIONS += no-async
endif
ifndef CONFIG_OPENSSL_WITH_EC2M
OPENSSL_OPTIONS += no-ec2m
endif
ifndef CONFIG_OPENSSL_WITH_ERROR_MESSAGES
OPENSSL_OPTIONS += no-err
endif
ifndef CONFIG_OPENSSL_WITH_TLS13
OPENSSL_OPTIONS += no-tls1_3
endif
ifndef CONFIG_OPENSSL_WITH_ARIA
OPENSSL_OPTIONS += no-aria
endif
ifndef CONFIG_OPENSSL_WITH_SM234
OPENSSL_OPTIONS += no-sm2 no-sm3 no-sm4
endif
ifndef CONFIG_OPENSSL_WITH_CAMELLIA
OPENSSL_OPTIONS += no-camellia
endif
ifndef CONFIG_OPENSSL_WITH_IDEA
OPENSSL_OPTIONS += no-idea
endif
ifndef CONFIG_OPENSSL_WITH_SEED
OPENSSL_OPTIONS += no-seed
endif
ifndef CONFIG_OPENSSL_WITH_MDC2
OPENSSL_OPTIONS += no-mdc2
endif
ifndef CONFIG_OPENSSL_WITH_WHIRLPOOL
OPENSSL_OPTIONS += no-whirlpool
endif
ifndef CONFIG_OPENSSL_WITH_CMS
OPENSSL_OPTIONS += no-cms
endif
ifndef CONFIG_OPENSSL_WITH_RFC3779
OPENSSL_OPTIONS += no-rfc3779
endif
ifdef CONFIG_OPENSSL_NO_DEPRECATED
OPENSSL_OPTIONS += no-deprecated
endif
ifeq ($(CONFIG_OPENSSL_OPTIMIZE_SPEED),y)
TARGET_CFLAGS := $(filter-out -O%,$(TARGET_CFLAGS)) -O3
endif
ifeq ($(CONFIG_OPENSSL_SMALL_FOOTPRINT),y)
OPENSSL_OPTIONS += -DOPENSSL_SMALL_FOOTPRINT
endif
ifdef CONFIG_OPENSSL_ENGINE
ifdef CONFIG_OPENSSL_ENGINE_BUILTIN
OPENSSL_OPTIONS += disable-dynamic-engine
ifndef CONFIG_OPENSSL_ENGINE_BUILTIN_AFALG
OPENSSL_OPTIONS += no-afalgeng
endif
ifdef CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO
OPENSSL_OPTIONS += enable-devcryptoeng
endif
ifndef CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK
OPENSSL_OPTIONS += no-padlockeng
endif
else
ifdef CONFIG_PACKAGE_libopenssl-devcrypto
OPENSSL_OPTIONS += enable-devcryptoeng
endif
ifndef CONFIG_PACKAGE_libopenssl-afalg
OPENSSL_OPTIONS += no-afalgeng
endif
ifndef CONFIG_PACKAGE_libopenssl-padlock
OPENSSL_OPTIONS += no-padlockeng
endif
endif
else
OPENSSL_OPTIONS += no-engine
endif
ifndef CONFIG_OPENSSL_WITH_DTLS
OPENSSL_OPTIONS += no-dtls
endif
ifdef CONFIG_OPENSSL_WITH_COMPRESSION
OPENSSL_OPTIONS += zlib-dynamic
else
OPENSSL_OPTIONS += no-comp
endif
ifndef CONFIG_OPENSSL_WITH_NPN
OPENSSL_OPTIONS += no-nextprotoneg
endif
ifndef CONFIG_OPENSSL_WITH_PSK
OPENSSL_OPTIONS += no-psk
endif
ifndef CONFIG_OPENSSL_WITH_SRP
OPENSSL_OPTIONS += no-srp
endif
ifndef CONFIG_OPENSSL_WITH_ASM
OPENSSL_OPTIONS += no-asm
endif
ifdef CONFIG_i386
ifndef CONFIG_OPENSSL_WITH_SSE2
OPENSSL_OPTIONS += no-sse2
endif
endif
OPENSSL_TARGET:=linux-$(call qstrip,$(CONFIG_ARCH))-openwrt
STAMP_CONFIGURED := $(STAMP_CONFIGURED)_$(shell echo $(OPENSSL_OPTIONS) | $(MKHASH) md5)
define Build/Configure
(cd $(PKG_BUILD_DIR); \
./Configure $(OPENSSL_TARGET) \
--prefix=/usr \
--libdir=lib \
--openssldir=/etc/ssl \
--cross-compile-prefix="$(TARGET_CROSS)" \
$(TARGET_CPPFLAGS) \
$(TARGET_LDFLAGS) \
$(OPENSSL_OPTIONS) && \
{ [ -f $(STAMP_CONFIGURED) ] || make clean; } \
)
endef
TARGET_CFLAGS += $(FPIC)
define Build/Compile
+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
CC="$(TARGET_CC)" \
SOURCE_DATE_EPOCH=$(SOURCE_DATE_EPOCH) \
OPENWRT_OPTIMIZATION_FLAGS="$(TARGET_CFLAGS)" \
$(OPENSSL_MAKEFLAGS) \
all
$(MAKE) -C $(PKG_BUILD_DIR) \
CC="$(TARGET_CC)" \
DESTDIR="$(PKG_INSTALL_DIR)" \
$(OPENSSL_MAKEFLAGS) \
install_sw install_ssldirs
endef
define Build/InstallDev
$(INSTALL_DIR) $(1)/usr/include
$(CP) $(PKG_INSTALL_DIR)/usr/include/openssl $(1)/usr/include/
$(INSTALL_DIR) $(1)/usr/lib/
$(CP) $(PKG_INSTALL_DIR)/usr/lib/lib{crypto,ssl}.{a,so*} $(1)/usr/lib/
$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/{openssl,libcrypto,libssl}.pc $(1)/usr/lib/pkgconfig/
[ -n "$(TARGET_LDFLAGS)" ] && $(SED) 's#$(TARGET_LDFLAGS)##g' $(1)/usr/lib/pkgconfig/{openssl,libcrypto,libssl}.pc || true
endef
define Package/libopenssl/install
$(INSTALL_DIR) $(1)/etc/ssl/certs
$(INSTALL_DIR) $(1)/etc/ssl/private
chmod 0700 $(1)/etc/ssl/private
$(INSTALL_DIR) $(1)/usr/lib
$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libcrypto.so.* $(1)/usr/lib/
$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libssl.so.* $(1)/usr/lib/
$(if $(CONFIG_OPENSSL_ENGINE),$(INSTALL_DIR) $(1)/usr/lib/$(ENGINES_DIR))
endef
define Package/libopenssl-conf/install
$(INSTALL_DIR) $(1)/etc/ssl/modules.cnf.d $(1)/etc/config $(1)/etc/init.d
$(CP) $(PKG_INSTALL_DIR)/etc/ssl/openssl.cnf $(1)/etc/ssl/
$(INSTALL_BIN) ./files/openssl.init $(1)/etc/init.d/openssl
$(SED) 's!%ENGINES_DIR%!/usr/lib/$(ENGINES_DIR)!' $(1)/etc/init.d/openssl
touch $(1)/etc/config/openssl
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),
$(CP) ./files/devcrypto.cnf $(1)/etc/ssl/modules.cnf.d/
echo -e "config engine 'devcrypto'\n\toption enabled '1'\n\toption builtin '1'" >> $(1)/etc/config/openssl)
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK),
$(CP) ./files/padlock.cnf $(1)/etc/ssl/modules.cnf.d/
echo -e "\nconfig engine 'padlock'\n\toption enabled '1'\n\toption builtin '1'" >> $(1)/etc/config/openssl)
endef
define Package/openssl-util/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/openssl $(1)/usr/bin/
endef
$(eval $(call BuildPackage,libopenssl))
$(eval $(call BuildPackage,libopenssl-conf))
$(eval $(call BuildPackage,libopenssl-afalg))
$(eval $(call BuildPackage,libopenssl-devcrypto))
$(eval $(call BuildPackage,libopenssl-legacy))
$(eval $(call BuildPackage,libopenssl-padlock))
$(eval $(call BuildPackage,openssl-util))
Reference in New Issue View Git Blame Copy Permalink