Files
eternalwrt-mt798x/target/linux/ramips/dts/mt7621_cudy_c200p.dts
T
Mieczyslaw NalewajandChristian Marangi 3e42e349d4 treewide: strip trailing whitespace
Strip trailing whitespace in all code:
find . -type f | grep "\.c$" | xargs sed -i 's/[ \t]\+$//'
find . -type f | grep "\.h$" | xargs sed -i 's/[ \t]\+$//'
find . -type f | grep "\.dts$" | xargs sed -i 's/[ \t]\+$//'
find . -type f | grep "\.dtsi$" | xargs sed -i 's/[ \t]\+$//'

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/22840
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2026-04-08 10:05:53 +02:00

186 lines
3.0 KiB
Devicetree

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "cudy,c200p", "mediatek,mt7621-soc";
model = "Cudy C200P";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_green;
led-running = &led_status_green;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,115200";
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
hw_algo = "toggle";
hw_margin_ms = <1000>;
always-running;
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
pse {
gpio-export,name = "pse";
gpio-export,output = <1>;
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_status_green: led-status-green {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led-poe-green {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
};
&reg_vbus {
/delete-property/ regulator-always-on;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&i2c {
status = "okay";
};
&gmac0 {
nvmem-cells = <&macaddr_bdinfo_de00 0>;
nvmem-cell-names = "mac-address";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfa0000>;
};
partition@ff0000 {
label = "bdinfo";
reg = <0xff0000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_bdinfo_de00: macaddr@de00 {
compatible = "mac-base";
reg = <0xde00 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
&state_default {
gpio {
groups = "jtag", "uart2", "uart3", "wdt";
function = "gpio";
};
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_bdinfo_de00 1>;
nvmem-cell-names = "mac-address";
};
&ethphy4 {
/delete-property/ interrupts;
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan5";
};
port@1 {
status = "okay";
label = "lan4";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan2";
};
};
};