Semih BaskanandJonas Jelonek
770a32e117
The label-mac-device alias cannot work on this device: it is resolved by reading the mac-address property of the aliased DT node, but gmac0 never has one. The MAC is stored in a file inside the tp_data UBIFS volume, so there is no fixed flash offset an nvmem-layout could point at, and the vendor bootloader does not fix up the FDT either. Drop the dead alias. Record the label MAC in board.d instead and assign it to the lan interface, as is already done for the other devices reading /tmp/tp_data/default-mac (Mercusys MR90X v1, Archer AX80 v1, RE6000XD). The explicit lan MAC also makes the br-lan address independent of the order of the bridge ports. Suggested-by: Felix Baumann <felix.bau@gmx.de> Signed-off-by: Semih Baskan <strst.gs@gmail.com> Link: https://github.com/openwrt/openwrt/pull/24180 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
413 lines
7.1 KiB
Devicetree
413 lines
7.1 KiB
Devicetree
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
|
|
#include "mt7988a.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/mt65xx.h>
|
|
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
|
|
|
|
/ {
|
|
model = "TP-Link BE450";
|
|
compatible = "tplink,be450", "mediatek,mt7988d";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
led-boot = &led_status;
|
|
led-failsafe = &led_status;
|
|
led-running = &led_status;
|
|
led-upgrade = &led_status;
|
|
};
|
|
|
|
memory@40000000 {
|
|
reg = <0x0 0x40000000 0x0 0x20000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
cpus {
|
|
/delete-node/ cpu@3;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&button_pins>;
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi {
|
|
label = "wlan";
|
|
linux,code = <KEY_WLAN>;
|
|
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
gpios = <&pio 21 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_ORANGE>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
|
|
led-1 {
|
|
gpios = <&pio 28 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WLAN_5GHZ;
|
|
};
|
|
|
|
led-2 {
|
|
gpios = <&pio 29 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WLAN_2GHZ;
|
|
};
|
|
|
|
led_status: led-3 {
|
|
gpios = <&pio 30 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
panic-indicator;
|
|
};
|
|
|
|
led-4 {
|
|
gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_LAN;
|
|
};
|
|
|
|
led-5 {
|
|
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WPS;
|
|
};
|
|
|
|
led-6 {
|
|
gpios = <&pio 57 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
|
|
led-7 {
|
|
gpios = <&pio 68 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_USB;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
proc-supply = <&rt5190_buck3>;
|
|
};
|
|
|
|
&cpu1 {
|
|
proc-supply = <&rt5190_buck3>;
|
|
};
|
|
|
|
&cpu2 {
|
|
proc-supply = <&rt5190_buck3>;
|
|
};
|
|
|
|
&cci {
|
|
proc-supply = <&rt5190_buck3>;
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_flash_pins>;
|
|
status = "okay";
|
|
|
|
spi_nand: spi_nand@0 {
|
|
compatible = "spi-nand";
|
|
reg = <0>;
|
|
|
|
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
|
spi-cal-addrlen = <5>;
|
|
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
|
|
spi-cal-datalen = <7>;
|
|
spi-cal-enable;
|
|
spi-cal-mode = "read-data";
|
|
|
|
spi-max-frequency = <52000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
|
|
partitions: partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "boot";
|
|
reg = <0x0 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "u-boot-env";
|
|
reg = <0x200000 0x100000>;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "ubi0";
|
|
reg = <0x300000 0x3200000>;
|
|
};
|
|
|
|
partition@3500000 {
|
|
label = "ubi1";
|
|
reg = <0x3500000 0x3200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6700000 {
|
|
label = "userconfig";
|
|
reg = <0x6700000 0x800000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6f00000 {
|
|
label = "tp_data";
|
|
reg = <0x6f00000 0x800000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ð {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1 {
|
|
phy-mode = "internal";
|
|
phy-connection-type = "internal";
|
|
phy = <&int_2p5g_phy>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac2 {
|
|
phy-mode = "usxgmii";
|
|
phy-connection-type = "usxgmii";
|
|
phy = <&phy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gsw_phy3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mdio_bus {
|
|
phy0: ethernet-phy@0 {
|
|
/* RTL8261N */
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <0>;
|
|
|
|
reset-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <100000>;
|
|
reset-deassert-us = <221000>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
rt5190a_64: rt5190a@64 {
|
|
compatible = "richtek,rt5190a";
|
|
reg = <0x64>;
|
|
/*interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;*/
|
|
vin2-supply = <&rt5190_buck1>;
|
|
vin3-supply = <&rt5190_buck1>;
|
|
vin4-supply = <&rt5190_buck1>;
|
|
|
|
regulators {
|
|
rt5190_buck1: buck1 {
|
|
regulator-name = "rt5190a-buck1";
|
|
regulator-min-microvolt = <5090000>;
|
|
regulator-max-microvolt = <5090000>;
|
|
regulator-allowed-modes =
|
|
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck2 {
|
|
regulator-name = "vcore";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
rt5190_buck3: buck3 {
|
|
regulator-name = "vproc";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4 {
|
|
regulator-name = "rt5190a-buck4";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-allowed-modes =
|
|
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo {
|
|
regulator-name = "rt5190a-ldo";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_1_pins>;
|
|
reset-gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
pcie@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
button_pins: button-pins {
|
|
pins = "GPIO_RESET", "GPIO_WPS", "SPI2_MISO";
|
|
bias-disable;
|
|
};
|
|
|
|
mdio0_pins: mdio0-pins {
|
|
mux {
|
|
function = "eth";
|
|
groups = "mdc_mdio0";
|
|
};
|
|
|
|
conf {
|
|
groups = "mdc_mdio0";
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
};
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins-g0 {
|
|
mux {
|
|
function = "i2c";
|
|
groups = "i2c0_1";
|
|
};
|
|
};
|
|
|
|
pcie0_1_pins: pcie0-pins-g1 {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0";
|
|
};
|
|
};
|
|
|
|
spi0_flash_pins: spi0-pins {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
};
|
|
|
|
enable-usb-power {
|
|
gpio-hog;
|
|
gpios = <32 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "USB power";
|
|
};
|
|
};
|
|
|
|
&ssusb1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
|
|
ports {
|
|
port@0 {
|
|
label = "lan3";
|
|
};
|
|
|
|
port@1 {
|
|
label = "lan2";
|
|
};
|
|
|
|
port@2 {
|
|
label = "lan1";
|
|
};
|
|
|
|
port@3 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&tphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|