eternalwrt-mt798x/target/linux/ath79/dts/qca9557_mikrotik_routerboard-960pgs.dts

// SPDX-License-Identifier: GPL-2.0-only

#include "qca955x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "mikrotik,routerboard-960pgs", "qca,qca9557";
	model = "MikroTik RouterBOARD 960PGS (hEX PoE/PowerBox Pro)";

	aliases {
		led-boot = &led_user;
		led-failsafe = &led_user;
		led-running = &led_user;
		led-upgrade = &led_user;
	};

	gpio_export {
		compatible = "gpio-export";

		buzzer {
			/* Beeper requires PWM for frequency selection */
			gpio-export,name = "buzzer";
			gpio-export,output = <0>;
			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
		};
	};

	i2c: i2c {
		compatible = "i2c-gpio";

		i2c-gpio,delay-us = <5>;
		i2c-gpio,timeout-ms = <1>;
		sda-gpios = <&gpio 18 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
		scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
	};

	keys {
		compatible = "gpio-keys";

		reset {
			debounce-interval = <60>;
			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
			label = "reset";
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_user: user {
			label = "green:user";
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
		};

		sfp {
			label = "green:sfp";
			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
		};
	};

	sfp1: sfp {
		compatible = "sff,sfp";

		i2c-bus = <&i2c>;
		maximum-power-milliwatt = <1000>;
		los-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
		mod-def0-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
		tx-disable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
	};

	reg_usb_vbus {
		compatible = "regulator-fixed";
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-name = "usb_vbus";
		gpio = <&gpio 13 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&mdio0 {
	status = "okay";

	switch@0 {
		compatible = "qca,qca8337";
		#address-cells = <1>;
		#size-cells = <0>;

		reg = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				label = "cpu";
				ethernet = <&eth0>;
				phy-mode = "rgmii-id";

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@1 {
				reg = <1>;
				label = "lan1";
				phy-mode = "internal";
				phy-handle = <&phy_port1>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_GREEN>;
						function = LED_FUNCTION_LAN;
						default-state = "keep";
					};
				};
			};

			port@2 {
				reg = <2>;
				label = "lan2";
				phy-mode = "internal";
				phy-handle = <&phy_port2>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_GREEN>;
						function = LED_FUNCTION_LAN;
						default-state = "keep";
					};
				};
			};

			port@3 {
				reg = <3>;
				label = "lan3";
				phy-mode = "internal";
				phy-handle = <&phy_port3>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_GREEN>;
						function = LED_FUNCTION_LAN;
						default-state = "keep";
					};
				};
			};

			port@4 {
				reg = <4>;
				label = "lan4";
				phy-mode = "internal";
				phy-handle = <&phy_port4>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_GREEN>;
						function = LED_FUNCTION_LAN;
						default-state = "keep";
					};
				};
			};

			port@5 {
				reg = <5>;
				label = "lan5";
				phy-mode = "internal";
				phy-handle = <&phy_port5>;

				leds {
					#address-cells = <1>;
					#size-cells = <0>;

					led@0 {
						reg = <0>;
						color = <LED_COLOR_ID_GREEN>;
						function = LED_FUNCTION_LAN;
						default-state = "keep";
					};
				};
			};
		};
		mdio {
			#address-cells = <1>;
			#size-cells = <0>;

			phy_port1: phy@0 {
				reg = <0>;
			};

			phy_port2: phy@1 {
				reg = <1>;
			};

			phy_port3: phy@2 {
				reg = <2>;
			};

			phy_port4: phy@3 {
				reg = <3>;
			};

			phy_port5: phy@4 {
				reg = <4>;
			};
		};
	};
};

&eth0 {
	status = "okay";

	pll-data = <0x8f000000 0xa0000101 0xa0001313>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&mdio1 {
	status = "okay";

	phy_sfp: ethernet-phy@0 {
		reg = <0>;
		phy-mode = "sgmii";
		sfp = <&sfp1>;
	};
};

&eth1 {
	status = "okay";

	phy-handle = <&phy_sfp>;
	pll-data = <0x03000000 0x00000101 0x00001616>;
	qca955x-sgmii-fixup;

	gmac-config {
		device = <&gmac>;
	};

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				compatible = "mikrotik,routerboot-partitions";
				label = "RouterBoot";
				reg = <0x0 0x20000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "bootloader1";
					reg = <0x0 0x0>;
					read-only;
				};

				hard_config {
					read-only;
				};

				bios {
					size = <0x1000>;
					read-only;
				};

				partition@10000 {
					label = "bootloader2";
					reg = <0x10000 0x0>;
					read-only;
				};

				soft_config {
				};
			};

			partition@20000 {
				compatible = "mikrotik,minor";
				label = "firmware";
				reg = <0x020000 0xfe0000>;
			};
		};
	};
};

&usb0 {
	status = "okay";
};

&usb_phy0 {
	status = "okay";
};