Christian Marangi
a66e30631c
Align the qualcommax target to the pattern already used on other devices where the device DTS are placed in a dedicated directory separate from the files directory. This, while trying to enforce a common pattern for every target, also permits to do modification to device DTS without having to trigger a recompilation of the entire kernel (as the files directory is not touched) Link: https://github.com/openwrt/openwrt/pull/22037 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
151 lines
2.5 KiB
Devicetree
151 lines
2.5 KiB
Devicetree
// SPDX-License-Identifier: MIT, GPL-2.0 or later
|
|
/* Copyright (c) 2025, Yang Xiwen <forbidden405@outlook.com> */
|
|
|
|
/dts-v1/;
|
|
|
|
#include "ipq6018.dtsi"
|
|
#include "ipq6018-cp-cpu.dtsi"
|
|
#include "ipq6018-ess.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "TP-Link EAP623-Outdoor HD V1.0";
|
|
compatible = "tplink,eap623od-hd-v1", "qcom,ipq6018";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart3;
|
|
led-boot = &led_sys_green;
|
|
led-failsafe = &led_sys_yellow;
|
|
led-running = &led_sys_green;
|
|
led-upgrade = &led_sys_yellow;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-append = " root=/dev/ubiblock0_1";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_sys_green: led-0 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_sys_yellow: led-1 {
|
|
color = <LED_COLOR_ID_YELLOW>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart3 {
|
|
pinctrl-0 = <&serial_3_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
mdio_pins: mdio-pins {
|
|
mdc {
|
|
pins = "gpio64";
|
|
function = "mdc";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mdio {
|
|
pins = "gpio65";
|
|
function = "mdio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
phy_pins: phy-reset-pin {
|
|
pins = "gpio77";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <10000>;
|
|
reset-post-delay-us = <50000>;
|
|
pinctrl-0 = <&mdio_pins>, <&phy_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
rtl8211f: ethernet-phy@4 {
|
|
reg = <4>;
|
|
|
|
realtek,clkout-disable;
|
|
realtek,aldps-enable;
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
switch_lan_bmp = <ESS_PORT5>; /* lan port bitmap */
|
|
switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance0*/
|
|
|
|
qcom,port_phyinfo {
|
|
port@5 {
|
|
port_id = <5>;
|
|
phy_address = <4>;
|
|
port_mac_sel = "QGMAC_PORT";
|
|
};
|
|
};
|
|
};
|
|
|
|
&edma {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp5 {
|
|
status = "okay";
|
|
phy-handle = <&rtl8211f>;
|
|
phy-mode = "sgmii";
|
|
label = "lan";
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&qpic_nand {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
nand-bus-width = <8>;
|
|
|
|
partitions {
|
|
compatible = "qcom,smem-part";
|
|
};
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
qcom,ath11k-calibration-variant = "TPLink-EAP623-Outdoor-HD-v1";
|
|
status = "okay";
|
|
};
|