- Bump to new LTS release.
- Move to folder asterisk and remove AST_MAJOR_VERSION variable, as we
only have one version anyway.
- Add new modules.
- Rename voicemail to app-voicemail.
- Remove deps of voicemail on res-adsi and res-smdi as they are
optional.
- Use INSTALL_DATA for headers.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Upstream dropped autotools support, so this converts the build to use
cmake. Adds a simple include fix as well as a fix for older c++
compilers (the latter is a patch from upstream).
Support for pcaps is now also compiled in, to follow what upstream
considers a "common" build.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Add a configuration option SIPROXD_MAX_CLIENTS used for compile-time sizing
of the maximum supported proxy clients. Set this to a default value of 32,
which is more suitable for a small network or CPE router and uses much
less memory than the upstream value of 512 (e.g. RSS of 2 MB vs 17 MB).
Drop the following patch in favour of the new config option:
* 005-reduce-rtpproxy-urlmap-size.patch
Also fix an incorrect configure option, and silence many warnings due to
unused VCS 'ident' variables in the sources.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
This patch was used in 1.10.4 but now it's not used anymore because the
external spandsp3 package is used. Drop the file.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
1. Upstream fixed the parallel build issue in
90ea0b7a1fdd7d8c5adaac87d74ed1c3c74086d0, so no need to force it off
anymore.
2. The same sed script for uncommenting modules in modules.conf is used
multiple times. This commit puts the script into a define that can be
reused.
3. Some ifdefs removed. They only clutter up the Makefile. The sed
script can run a few extra times, it does not matter.
4. Add a few extra dependencies that came to light.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Minor version bump. This also partially reverts
7e7ab06ccd by disabling parallel builds,
as there are sporadic build failures again
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This release includes bug fixes and improvements accumulated over the last
4 years of development snapshots [1].
Bump upstream version, build new plugins 'stats' and 'blacklist', and add
an 'sqlite3' package dependency for siproxd-mod-blacklist.
Disable procd capturing stderr to syslog, since siproxd in 'foreground'
mode writes both to syslog and stderr, duplicating log messages.
Include a patch to drastically reduce memory usage (RSS from 17MB to 5MB
on ipq40xx platform):
* 005-reduce-rtpproxy-urlmap-size.patch
Drop the following patches now included upstream:
* 010-syslog-msg.patch
* 020-gcc10.patch
* 100-musl-compat.patch
[1] http://siproxd.sourceforge.net/index.php?op=changelog.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
This now uses the external spandsp3 package.
Patches:
- 390-t38-reinvite-488-fix.patch removed (finally upstreamed)
- 340-mod-spandsp-fix-typo.patch and 350-gsmopen-spandsp-fixup.patch
added (both accepted into upstream master already)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Upstream split out spandsp as well. But their spandsp "fork" may not be
a drop-in replacement for the regular spandsp. For now we keep it built
into freeswitch via patch.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- package two new modules: dlgs and pv_headers
- upstream actually provides three more new modules, but two are missing
dependencies in OpenWrt and one is related to systemd
- use INSTALL_DATA instead of INSTALL_CONF for kamailio configuration
files (not talking about /etc/config/kamailio) as they're default
configuration
- refresh 050-fix-kamailio-utils.patch
- drop upstreamed 150-python3-cross-compile.patch
- libsrutils is no longer packaged as upstream moved it into the core
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
No need to have this symbol around here. libfreetdm is part of the same
package (freeswitch) anyway.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
A small but important oversight crept into the last asterisk-chan-dongle
update. The iconv library detection was changed to look for iconv()
instead of libiconv().
Reminder: the autoconf macros for finding libraries do _not_ include any
extra headers when testing the compile. So the redefinitions done in
iconv.h provided by any libiconv (stub or regular) aren't visible during
the test the macros execute.
This means that when testing for iconv() the only iconv that can be
detected is the one from libc. Moreover, if the libc doesn't provide
iconv, the check will fail. Below example is with uclibc:
checking for iconv in -liconv... no
configure: error: iconv library missing
Makefile:87: recipe for target '/builder/shared-workdir/build/sdk/build_dir/target-arc_archs_uClibc/asterisk-chan-dongle-asterisk16/asterisk-chan-dongle-2020-05-28-328b2b7d/.configured_a17fb5ef857664f03cd0ce37cc5ea591' failed
So, this changes the patch to look for libiconv(), again.
Also, instead of using AC_CHECK_LIB this uses AC_SEARCH_LIBS, like
upstream does. There apparently was a problem with that in the past, but
now it works fine.
checking for rm... rm
checking for library containing libiconv... -liconv
checking for sqlite3_open in -lsqlite3... yes
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Currently we disable some sofia tests to prevent build failure. An issue
was actually raised upstream ([1]) where this was discussed.
This cleared up some doubts. For instance it was established that
libcheck is used as a test framework, if the lib is detected. In OpenWrt
libcheck is available, so it may be in staging during the freeswitch
build.
Upstream also mentioned that libcheck is not always compatible with
freeswitch, which depends on the libcheck version.
This commit prevents libcheck detection. This is nicer than explicitly
disabling tests that fail.
[1] https://github.com/signalwire/freeswitch/issues/681
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Bump dongle plugin to latest git revision. PKG_SOURCE_SUBDIR and
PKG_BUILD_DIR are removed because defaults are fine. PKG_VERSION is
replaced by PKG_SOURCE_DATE, which is in line with OpenWrt
recommendation.
Soft deps are removed as per request in issue #536.
iconv handling is updated. Upstream now lets us specify the include
directory, so that makes the patch simpler. The iconv lib detection is
also updated so that it never picks the libc iconv. This way we get the
same iconv handling independent of the libc in use. Now it'll be always
iconv-stub or iconv-full.
libsqlite3 dep is made explicit. There was always a dep on it, but it
was implicit via asterisk. When the dep is made explicit, the dongle
package picks up on the sqlite3 ABI_VERSION, which is nice.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The rtpengine build system uses the Makefiles to generate source files
on the fly. This usually works fine, but when building in parallel,
intermittently the generated files contain garbage (like, lines are
repeated, causing redefinition errors).
As a workaround this commit disables parallel builds.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commit follows upstream, how they include the Debian build system
flags, appending them to their own. To that end OpenWrt's flags are now
saved at the beginning of the Makefiles, and appended at the bottom of
lib/lib.Makefile.
This also sorts out the iptables module compile, to use OpenWrt's
LDFLAGS.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
We have both liblua and liblua5.3 in $(STAGING_DIR)/usr. But the headers
for liblua5.3 are in (STAGING_DIR)/usr/include/lua5.3. The way things
are now, Asterisk uses the headers from liblua and links against
liblua5.3.
The easiest way out of this is to turn off the lua detection that is
based on version numbers. The next detection looks for a version-less
lua, which works fine.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commit changes handling of configuration and init a bit:
1. Asterisk configuration files are installed with $(INSTALL_DATA). This
way there is no need to chown /etc/asterisk to user asterisk. The
package provides the standard asterisk configuration (no secrets) so
it's OK to install it readable for all. If users put something
sensitive in there they can update permissions how they like.
2. The init script no longer creates directories that the users can
configure in /etc/config/asterisk, which could be all kinds of
strange directories. Instead only the default directories are
created, and only the ones that reside on volatile memory. The other
directories are now created by the package itself.
3. This commit removes the ability to choose a user/group via
/etc/config/asterisk. This makes the init script simpler. If anybody
wants to play around with the user/group, then it's up to them to fix
the permissions.
4. "local" is removed because it's not POSIX.
5. From issue #520 we know that adding the user to the dialout group
does not help with the device permissions for chan_lantiq. This
removes it again.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
