uboot: renew glinet gl-mt2500 support
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
132
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-glinet-gl-mt2500.dts
Executable file
132
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-glinet-gl-mt2500.dts
Executable file
@@ -0,0 +1,132 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2021 MediaTek Inc.
|
||||
* Author: Sam Shih <sam.shih@mediatek.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7981.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
model = "mt7981-glinet_gl-mt2500";
|
||||
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
tick-timer = &timer0;
|
||||
};
|
||||
|
||||
config {
|
||||
bootcmd = "mtkboardboot";
|
||||
blink_led = "blue:run";
|
||||
system_led = "white:system";
|
||||
gpio_power_clr = <12>;
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x40000000 0x40000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
label = "white:system";
|
||||
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "blue:run";
|
||||
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
bl2_verify {
|
||||
bl2_compatible = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
mediatek,gmac-id = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id03a2.9461";
|
||||
reg = <0x0>;
|
||||
phy-mode = "gmii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <52000000>;
|
||||
cap-mmc-highspeed;
|
||||
cap-mmc-hw-reset;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
mmc0_pins_default: mmc0default {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
conf-cmd-dat {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO",
|
||||
"SPI0_CS", "SPI0_HOLD", "SPI0_WP",
|
||||
"SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
|
||||
input-enable;
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
conf-clk {
|
||||
pins = "SPI1_CS";
|
||||
drive-strength = <MTK_DRIVE_6mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||
};
|
||||
conf-rst {
|
||||
pins = "PWM0";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -0,0 +1,103 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
||||
CONFIG_POSITION_INDEPENDENT=y
|
||||
CONFIG_ARCH_MEDIATEK=y
|
||||
CONFIG_TEXT_BASE=0x41e00000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x80000
|
||||
CONFIG_ENV_OFFSET=0x400000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="mt7981-glinet-gl-mt2500"
|
||||
CONFIG_SYS_PROMPT="MT7981> "
|
||||
CONFIG_TARGET_MT7981=y
|
||||
CONFIG_DEBUG_UART_BASE=0x11002000
|
||||
CONFIG_DEBUG_UART_CLOCK=40000000
|
||||
CONFIG_SYS_LOAD_ADDR=0x46000000
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_MEDIATEK_BOOTMENU=y
|
||||
CONFIG_MTK_BOOTMENU_MMC=y
|
||||
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
|
||||
CONFIG_MTK_WEB_FAILSAFE=y
|
||||
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
|
||||
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
|
||||
CONFIG_MTK_UPGRADE_FIP_VERIFY=y
|
||||
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
|
||||
CONFIG_ENV_VARS_UBOOT_CONFIG=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_AUTOBOOT_MENU_SHOW=y
|
||||
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
|
||||
CONFIG_DEFAULT_FDT_FILE="mt7981-emmc-rfb"
|
||||
CONFIG_LOGLEVEL=7
|
||||
CONFIG_LOG=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_CBSIZE=512
|
||||
CONFIG_SYS_PBSIZE=1049
|
||||
# CONFIG_BOOTM_NETBSD is not set
|
||||
# CONFIG_BOOTM_PLAN9 is not set
|
||||
# CONFIG_BOOTM_RTEMS is not set
|
||||
# CONFIG_BOOTM_VXWORKS is not set
|
||||
# CONFIG_CMD_ELF is not set
|
||||
CONFIG_CMD_MEMINFO=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
# CONFIG_CMD_UNLZ4 is not set
|
||||
# CONFIG_CMD_UNZIP is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPIO_READ=y
|
||||
CONFIG_CMD_PWM=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_GPT_RENAME=y
|
||||
CONFIG_CMD_LSBLK=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PART=y
|
||||
CONFIG_CMD_READ=y
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_SMC=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_CMD_GL_BTN=y
|
||||
CONFIG_PARTITION_TYPE_GUID=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
||||
CONFIG_ENV_IMPORT_FDT=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_USE_IPADDR=y
|
||||
CONFIG_IPADDR="192.168.1.1"
|
||||
CONFIG_USE_NETMASK=y
|
||||
CONFIG_NETMASK="255.255.255.0"
|
||||
CONFIG_USE_SERVERIP=y
|
||||
CONFIG_SERVERIP="192.168.1.2"
|
||||
CONFIG_PROT_TCP=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_BUTTON=y
|
||||
CONFIG_BUTTON_GPIO=y
|
||||
CONFIG_CLK=y
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_BLINK=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MMC_MTK=y
|
||||
CONFIG_PHY_FIXED=y
|
||||
CONFIG_MEDIATEK_ETH=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCONF=y
|
||||
CONFIG_PINCTRL_MT7981=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_MTK_POWER_DOMAIN=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_DM_PWM=y
|
||||
CONFIG_PWM_MTK=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_MTK_SERIAL=y
|
||||
CONFIG_TIMER=y
|
||||
CONFIG_MTK_TIMER=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
CONFIG_HEXDUMP=y
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
CONFIG_LMB_MAX_REGIONS=64
|
||||
Reference in New Issue
Block a user