uboot: renew glinet gl-mt3000 support

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-glinet-gl-mt3000.dts

@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7981.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "mt7981-glinet_gl-mt3000";
+	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer0;
+	};
+
+	config {
+		bootcmd = "mtkboardboot";
+		blink_led = "blue:run";
+		system_led = "white:system";
+		gpio_power_clr = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "white:system";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "blue:run";
+			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	bl2_verify {
+		bl2_compatible = "spim-nand";
+	};
+};
+
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <1>;
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+
+	mdio {
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id03a2.9461";
+			reg = <0x0>;
+			phy-mode = "gmii";
+		};
+	};
+};
+
+&pinctrl {
+	spi_flash_pins: spi0-pins-func-1 {
+		mux {
+			function = "flash";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+	must_tx;
+	enhance_timing;
+	dma_ext;
+	ipm_design;
+	support_quad;
+	tick_dly = <2>;
+	sample_sel = <0>;
+
+	spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "disabled";
+};

uboot-mtk-20230718-09eda825/configs/mt7981_glinet_gl-mt3000_defconfig

@@ -0,0 +1,101 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x0
+CONFIG_DEFAULT_DEVICE_TREE="mt7981-glinet-gl-mt3000"
+CONFIG_SYS_PROMPT="MT7981> "
+CONFIG_TARGET_MT7981=y
+CONFIG_DEBUG_UART_BASE=0x11002000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_SYS_LOAD_ADDR=0x46000000
+CONFIG_DEBUG_UART=y
+CONFIG_MEDIATEK_BOOTMENU=y
+CONFIG_MEDIATEK_BOOTMENU_DELAY=3
+CONFIG_MTK_WEB_FAILSAFE=y
+CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
+CONFIG_MTK_UBI_SUPPORT=y
+CONFIG_MTK_UPGRADE_BL2_VERIFY=y
+# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
+CONFIG_ENABLE_NAND_NMBM=y
+CONFIG_NMBM_MAX_BLOCKS=32
+CONFIG_FIT=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
+CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
+CONFIG_LOGLEVEL=7
+CONFIG_LOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=1049
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_UNLZ4 is not set
+# CONFIG_CMD_UNZIP is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPIO_READ=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NMBM=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
+CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(bl2),512k(u-boot-env),2048k(factory),2048k(fip),256k(log),252160k(ubi)"
+CONFIG_CMD_GL_BTN=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MTD=y
+CONFIG_ENV_MTD_NAME="u-boot-env"
+CONFIG_ENV_SIZE_REDUND=0x80000
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.1.1"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.1.2"
+CONFIG_PROT_TCP=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK=y
+# CONFIG_I2C is not set
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7981=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_MTK=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_TIMER=y
+CONFIG_MTK_TIMER=y
+CONFIG_HEXDUMP=y