diff --git a/defconfig/mt7981-ax3000.config b/defconfig/mt7981-ax3000.config index 2af21be193..e07e2fb09a 100644 --- a/defconfig/mt7981-ax3000.config +++ b/defconfig/mt7981-ax3000.config @@ -79,6 +79,8 @@ CONFIG_TARGET_DEVICE_mediatek_mt7981_DEVICE_xiaomi_mi-router-wr30u-stock=y CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7981_DEVICE_xiaomi_mi-router-wr30u-stock="" CONFIG_TARGET_DEVICE_mediatek_mt7981_DEVICE_zbtlink_zbt-z8103ax-c=y CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7981_DEVICE_zbtlink_zbt-z8103ax-c="" +CONFIG_TARGET_DEVICE_mediatek_mt7981_DEVICE_zbtlink_zbt-z8103ax-c-nmbm=y +CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7981_DEVICE_zbtlink_zbt-z8103ax-c-nmbm="" CONFIG_DEVEL=y CONFIG_TOOLCHAINOPTS=y CONFIG_BUSYBOX_CUSTOM=y diff --git a/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981b-zbtlink-zbt-z8103ax-c-nmbm.dts b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981b-zbtlink-zbt-z8103ax-c-nmbm.dts new file mode 100644 index 0000000000..8fe8a38c8d --- /dev/null +++ b/target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981b-zbtlink-zbt-z8103ax-c-nmbm.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "mt7981.dtsi" + +/ { + model = "Zbtlink 3000M(WiFi6) ZBT-Z8103AX-C"; + compatible = "zbtlink,zbt-z8103ax-c", "mediatek,mt7981b"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_green; + }; + + chosen: chosen { + bootargs = "console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000"; + }; + + memory { + reg = <0 0x40000000 0 0x10000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-mesh { + label = "mesh"; + linux,code = ; + linux,input-type = ; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-wan { + label = "green:wan"; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led-status-blue { + label = "status:blue"; + gpios = <&pio 23 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: led-status-green { + label = "status:green"; + gpios = <&pio 24 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-status-red { + label = "status:red"; + gpios = <&pio 25 GPIO_ACTIVE_LOW>; + }; + + led-wlan2g { + label = "wlan2g"; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + }; + + led-wlan5g { + label = "wlan5g"; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + }; + }; + + gsw: gsw@0 { + compatible = "mediatek,mt753x"; + mediatek,ethsys = <ðsys>; + #address-cells = <1>; + #size-cells = <0>; + }; + + nmbm_spim_nand { + compatible = "generic,nmbm"; + + #address-cells = <1>; + #size-cells = <1>; + + lower-mtd-device = <&spi_nand>; + forced-create; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0000000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7280000>; + }; + + /* Leave last 8 MiB for NMBM bad block table */ + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&phy0>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id03a2.9461"; + reg = <0>; + phy-mode = "gmii"; + nvmem-cells = <&phy_calibration>; + nvmem-cell-names = "phy-cal-data"; + }; + }; +}; + +&gsw { + mediatek,mdio = <&mdio>; + mediatek,mdio_master_pinmux = <0>; + reset-gpios = <&pio 39 0>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + + port6: port@6 { + compatible = "mediatek,mt753x-port"; + mediatek,ssc-on; + reg = <6>; + phy-mode = "sgmii"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; +}; + +&hnat { + mtketh-wan = "eth1"; + mtketh-lan = "eth0"; + mtketh-max-gmac = <2>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: spi_nand@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <52000000>; + + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + bias-pull-up = <103>; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + bias-pull-down = <103>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&xhci { + phys = <&u2port0 PHY_TYPE_USB2>; + mediatek,u3p-dis-msk = <0x1>; + status = "okay"; +}; diff --git a/target/linux/mediatek/image/mt7981.mk b/target/linux/mediatek/image/mt7981.mk index ff86121e3d..ac409db7ff 100644 --- a/target/linux/mediatek/image/mt7981.mk +++ b/target/linux/mediatek/image/mt7981.mk @@ -863,3 +863,21 @@ define Device/zbtlink_zbt-z8103ax-c IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += zbtlink_zbt-z8103ax-c + +define Device/zbtlink_zbt-z8103ax-c-nmbm + DEVICE_VENDOR := Zbtlink + DEVICE_MODEL := ZBT-Z8103AX-C-NMBM + DEVICE_DTS := mt7981b-zbtlink-zbt-z8103ax-c-nmbm + DEVICE_DTS_DIR := $(DTS_DIR)/mediatek + SUPPORTED_DEVICES := zbtlink,zbt-z8103ax-c-nmbm + DEVICE_PACKAGES := $(MT7981_USB_PKGS) luci-app-samba4 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 117248k + KERNEL_IN_UBI := 1 + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += zbtlink_zbt-z8103ax-c-nmbm