From d78af3aa816344d6e76dd77fbaf410fcbfa58bef Mon Sep 17 00:00:00 2001
From: Jonas Karlman <jonas@kwiboo.se>
Date: Wed, 23 Jul 2025 12:23:06 +0000
Subject: [PATCH] arm64: dts: rockchip: Enable USB 2.0 ports on Radxa E20C

The Radxa E20C has one USB2.0 Type-A HOST port and one USB2.0 Type-C OTG
port.

Add support for using the USB 2.0 ports on Radxa E20C.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 .../boot/dts/rockchip/rk3528-radxa-e20c.dts   | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -136,6 +136,18 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	vcc5v0_usb20: regulator-5v0-vcc-usb20 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_en>;
+		regulator-name = "vcc5v0_usb20";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vccio_sd: regulator-vccio-sd {
 		compatible = "regulator-gpio";
 		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -275,6 +287,12 @@
 			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb {
+		usb_host_en: usb-host-en {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm1 {
@@ -322,3 +340,33 @@
 	pinctrl-0 = <&uart0m0_xfer>;
 	status = "okay";
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy>;
+	maximum-speed = "high-speed";
+	phys = <&usb2phy_otg>;
+	phy-names = "usb2-phy";
+	snps,dis_u2_susphy_quirk;
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};