Files
target_linux_rockchip-6.x/patches-6.12/003-10-v6.16-arm64-dts-rockchip-Add-vcc-supply-to-SPI-flash-on-rk.patch
2026-01-16 04:36:33 +00:00

29 lines
1006 B
Diff

From 425af91c58023a8924cc2330384e040d388adc4e Mon Sep 17 00:00:00 2001
From: Diederik de Haas <didi.debian@cknow.org>
Date: Fri, 25 Apr 2025 10:44:44 +0200
Subject: arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3588-rock-5b
The Radxa Rock 5B component placement document identifies the SPI Nor
Flash chip as 'U4300' which is described on page 25 of the Schematic
v1.45. There we can see that the VCC connector is connected to the
VCC_3V3_S3 power source.
This fixes the following warning:
spi-nor spi5.0: supply vcc not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -562,6 +562,7 @@
spi-max-frequency = <104000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
+ vcc-supply = <&vcc_3v3_s3>;
};
};