Files
target_linux_rockchip-6.x/patches-6.12/005-05-v6.15-arm64-dts-rockchip-switch-Rock-5C-to-PMIC-based-TSHU.patch
2026-01-16 04:36:33 +00:00

37 lines
1.4 KiB
Diff

From 52cababc9c1914ebf50929bfb9a67c8f74cd60ab Mon Sep 17 00:00:00 2001
From: Alexey Charkov <alchark@gmail.com>
Date: Tue, 4 Feb 2025 13:02:28 +0400
Subject: arm64: dts: rockchip: switch Rock 5C to PMIC-based TSHUT reset
Radxa Rock 5C supports both CRU-based (default) and PMIC-based reset
upon thermal runaway conditions. The former resets the SoC by internally
poking the CRU from TSADC, while the latter power-cycles the whole board
by pulling the PMIC reset line low in case of uncontrolled overheating.
Switch to a PMIC-based reset, as the more 'thorough' of the two.
Tested by temporarily setting rockchip,hw-tshut-temp to 65C to simulate
overheating - this causes the board to reset when any of the on-chip
temperature sensors surpasses the tshut temperature.
Requires Alexander's patch [1] fixing TSADC pinctrl assignment
[1] https://lore.kernel.org/r/20250130053849.4902-1-eagle.alexander923@gmail.com
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250204-rock-5c-tshut-v1-1-33301e4eef64@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
@@ -873,6 +873,8 @@
};
&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
status = "okay";
};