eternalwrt/eternalwrt-mt798x
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

rockchip: add support for NLnet xiguapi v3

Browse Source 
Hardware specification:
SoC: RockChip RK3568
Flash: 32GB EMMC
RAM: 4GB DDR4
Ethernet: 2x 10/100/1000 Mbps
LED: Status (blue) Net (blue) Power(blue)
WiFi: M.2 E-key or minipcie wireless card
Button: Reset
USB: 1x USB 3.0 port
HDMI: 1x HDMI display port
LCD: 1x SPI LCD Display port
Power: DC 12V 1.5A

For TF card:
Use TF card burning tools such as balenaEtcher to flash the image
onto the tf card.

For Emmc:
To flash the device using the official RK flashing tool, RKDevTool,
in conjunction with a customized miniLoader.bin, please follow the
steps below:

Launch RKDevTool and set the load address to 0x00000000. Select the
miniLoader.bin file, then press and hold the flashing key. Connect
the power supply and power on the device to enter MARSROM mode.
Click the RUN button in RKDevTool to initiate the flashing process
for miniLoader.bin. Wait for the operation to complete and for the
device to reboot into MASKROM mode.
After successfully loading miniLoader.bin, retain the address setting
at 0x00000000 in RKDevTool. Extract the target firmware image file,
then select the decompressed .img file in RKDevTool. Click RUN to
begin the flashing process. Upon successful completion, the device
will automatically restart.

Signed-off-by: KCrO <2209352301@qq.com>
[warp commit message for every 70 chars]
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit edf9154f6d)
This commit is contained in:
KCrO
2025-10-23 14:52:44 +08:00
committed by Tianling Shen
parent edb01ab812
commit 78814b5fbe
9 changed files with 1726 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
package/boot/uboot-rockchip/Makefile
+7
View File
@@ -322,6 +322,12 @@ define U-Boot/sige3-rk3568
armsom_sige3
endef
define U-Boot/xiguapi-v3-rk3568
$(U-Boot/rk3568/Default)
NAME:=XiGuaPi V3
BUILD_DEVICES:= \
nlnet_xiguapi-v3
endef
# RK3588 boards
@@ -429,6 +435,7 @@ UBOOT_TARGETS := \
nanopi-r5c-rk3568 \
nanopi-r5s-rk3568 \
photonicat-rk3568 \
xiguapi-v3-rk3568 \
radxa-e25-rk3568 \
roc-pc-rk3568 \
rock-3a-rk3568 \
package/boot/uboot-rockchip/patches/900-arm-add-dts-files.patch
+3 -2
View File
@@ -1,6 +1,6 @@
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,23 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
@@ -87,6 +87,24 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rk3368-geekbox.dtb \
rk3368-px5-evb.dtb \
@@ -16,7 +16,8 @@
+ rk3568-mmbox-anas3035.dtb \
+ rk3568-lyt-t68m.dtb \
+ rk3568-mrkaio-m68s.dtb \
+ rk3568-photonicat.dtb
+ rk3568-photonicat.dtb \
+ rk3568-xiguapi-v3.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3588) += \
+ rk3588-cyber3588-aib.dtb
package/boot/uboot-rockchip/src/arch/arm/dts/rk3528-xiguapi-v3-u-boot.dtsi
+3
View File
@@ -0,0 +1,3 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "rk3568-u-boot.dtsi"
package/boot/uboot-rockchip/src/arch/arm/dts/rk3568-xiguapi-v3.dts
+811
View File
@@ -0,0 +1,811 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "NLnet XiGuaPi V3";
compatible = "nlnet,xiguapi-v3", "rockchip,rk3568";
aliases {
ethernet0 = &gmac0;
ethernet1 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
};
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1750000>;
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
press-threshold-microvolt = <0>;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&sys_led>, <&net_led>;
pinctrl-names = "default";
net_led: net-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
};
sys_led: sys-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
};
};
led-controller {
compatible = "pwm-leds";
backlight: backlight-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_BACKLIGHT;
pwms = <&pwm14 0 1000000 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
cooling-levels = <30 75 135 195 255>;
pwms = <&pwm7 0 40000 0>;
};
rfkill-modem {
compatible = "rfkill-gpio";
label = "M.2 USB Modem";
radio-type = "wwan";
reset-gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
};
vcc0v6_ddr: regulator-vcc0v6-ddr {
compatible = "regulator-fixed";
regulator-name = "vcc0v6_ddr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <600000>;
vin-supply = <&vcc_sysin_b>;
};
vcc_3v3: regulator-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/* pi6c pcie clock generator */
vcc3v3_pi6c: regulator-vcc3v3-pi6c {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_en>;
regulator-name = "vcc3v3_pi6c";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v>;
};
vcc3v3_sd: regulator-vcc3v3-sd {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
regulator-name = "vcc3v3_sd";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3>;
};
/* actually fed by vcc_3v3 */
vcc_3v3_wifi: regulator-vcc-3v3-wifi {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_wifi";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_pi6c>;
};
/* actually fed by bat+ */
vcc_4v0_5g: regulator-vcc-4v0-5g {
compatible = "regulator-fixed";
regulator-name = "vcc_4v0_5g";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
vin-supply = <&vcc3v3_pi6c>;
};
vcc5v: regulator-vcc5v {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en>;
regulator-name = "vcc5v0_usb_otg0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v>;
};
/* sourced from vcc5v and bat+ via rk817 sw5 */
vcc_sysin_b: regulator-vcc-sysin-b {
compatible = "regulator-fixed";
regulator-name = "vcc_sysin_b";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
};
};
&combphy0 {
status = "okay";
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&cpu_thermal {
trips {
cpu_low: cpu-low {
temperature = <40000>;
hysteresis = <5000>;
type = "active";
};
cpu_warm: cpu-warm {
temperature = <50000>;
hysteresis = <5000>;
type = "active";
};
cpu_hot: cpu-hot {
temperature = <60000>;
hysteresis = <3000>;
type = "active";
};
cpu_hall: cpu-hall {
temperature = <70000>;
hysteresis = <2000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&cpu_low>;
cooling-device = <&fan 0 1>;
};
map1 {
trip = <&cpu_warm>;
cooling-device = <&fan 1 2>;
};
map2 {
trip = <&cpu_hot>;
cooling-device = <&fan 2 3>;
};
map3 {
trip = <&cpu_hall>;
cooling-device = <&fan 3 4>;
};
};
};
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
status = "okay";
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sysin_b>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
system-power-controller;
wakeup-source;
#clock-cells = <1>;
vcc1-supply = <&vcc_sysin_b>;
vcc2-supply = <&vcc_sysin_b>;
vcc3-supply = <&vcc_sysin_b>;
vcc4-supply = <&vcc_sysin_b>;
vcc5-supply = <&vcc_sysin_b>;
vcc6-supply = <&vcc_sysin_b>;
vcc7-supply = <&vcc_sysin_b>;
vcc8-supply = <&vcc_sysin_b>;
vcc9-supply = <&dcdc_boost>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_logic";
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_gpu";
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc3v3_sys: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc3v3_sys";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcca_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_image";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_image: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_image";
regulator-state-mem {
regulator-off-in-suspend;
};
};
dcdc_boost: BOOST {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <5400000>;
regulator-name = "dcdc_boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
otg_switch: OTG_SWITCH {
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c5 {
status = "okay";
};
&mdio0 {
rgmii_phy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
pinctrl-names = "default";
pinctrl-0 = <&eth_phy0_reset_pin>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
};
};
&mdio1 {
rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
pinctrl-names = "default";
pinctrl-0 = <&eth_phy1_reset_pin>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
};
};
&pcie2x1 {
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_wifi>;
status = "okay";
};
&pcie30phy {
phy-supply = <&vcc3v3_pi6c>;
data-lanes = <1 2>;
status = "okay";
};
&pcie3x1 {
num-lanes = <1>;
reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_wifi>;
status = "okay";
};
&pcie3x2 {
num-lanes = <1>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_wifi>;
status = "okay";
};
&pinctrl {
backlight {
backlight_led_pin: backlight-led-pin {
rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
display {
spi3_display_dc_pin: spi3-display-dc-pin {
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
display_reset_pin: display-reset-pin {
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
net_led_pin: net-led-pin {
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
sys_led_pin: sys-led-pin {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_en: pcie-en {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
spi3 {
spi3_sck: spi3-sck {
rockchip,pins = <4 RK_PC2 2 &pcfg_pull_none>;
};
spi3_mosi: spi3-mosi {
rockchip,pins = <4 RK_PC3 2 &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac0 {
eth_phy0_reset_pin: eth-phy0-reset-pin {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
gmac1 {
eth_phy1_reset_pin: eth-phy1-reset-pin {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcca1v8_pmu>;
vccio5-supply = <&vcc3v3_sys>;
vccio6-supply = <&vcca1v8_pmu>;
vccio7-supply = <&vcc3v3_sys>;
status = "okay";
};
&pwm7 {
pinctrl-0 = <&pwm7_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm14 {
pinctrl-0 = <&pwm14m0_pins>;
pinctrl-names = "default";
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
mmc-hs200-1_8v;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
post-power-on-delay-ms = <800>;
sd-uhs-sdr50;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&spi3 {
pinctrl-names = "default";
pinctrl-0 = <&spi3m1_cs0 &spi3_sck &spi3_mosi>;
status = "okay";
display@0 {
compatible = "galaxycore,gc9307";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi3_display_dc_pin &display_reset_pin>;
dc-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
backlight = <&backlight>;
buswidth = <8>;
rotate = <270>;
};
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc_4v0_5g>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb_otg0>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb_otg0>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb_otg0>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
package/boot/uboot-rockchip/src/configs/xiguapi-v3-rk3568_defconfig
+74
View File
@@ -0,0 +1,74 @@
CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_DEFAULT_DEVICE_TREE="rk3568-xiguapi-v3"
CONFIG_ROCKCHIP_RK3568=y
CONFIG_SPL_SERIAL=y
CONFIG_DEBUG_UART_BASE=0xFE660000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-xiguapi-v3.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_ATF=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
# CONFIG_OF_UPSTREAM is not set
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
# CONFIG_SPI_FLASH is not set
CONFIG_PHY_REALTEK=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_ERRNO_STR=y
target/linux/rockchip/armv8/base-files/etc/board.d/02_network
+2
View File
@@ -28,6 +28,7 @@ rockchip_setup_interfaces()
friendlyarm,nanopi-r5c|\
lunzn,fastrhino-r66s|\
mmbox,anas3035|\
nlnet,xiguapi-v3|\
radxa,e25|\
radxa,rock-3b|\
xunlong,orangepi-5-plus)
@@ -77,6 +78,7 @@ rockchip_setup_macs()
friendlyarm,nanopi-r2s|\
lunzn,fastrhino-r66s|\
lunzn,fastrhino-r68s|\
nlnet,xiguapi-v3|\
mmbox,anas3035)
wan_mac=$(macaddr_generate_from_mmc_cid mmcblk0)
lan_mac=$(macaddr_add "$wan_mac" 1)
target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity
+1
View File
@@ -38,6 +38,7 @@ friendlyarm,nanopi-r3s|\
friendlyarm,nanopi-r5c|\
lunzn,fastrhino-r66s|\
mmbox,anas3035|\
nlnet,xiguapi-v3|\
radxa,e25|\
sinovoip,rk3568-bpi-r2pro|\
xunlong,orangepi-5-plus)
target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-xiguapi-v3.dts
+816
View File
@@ -0,0 +1,816 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "NLnet XiGuaPi V3";
compatible = "nlnet,xiguapi-v3", "rockchip,rk3568";
aliases {
ethernet0 = &gmac0;
ethernet1 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
led-boot = &sys_led;
led-failsafe = &sys_led;
led-running = &sys_led;
led-upgrade = &sys_led;
};
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1750000>;
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
press-threshold-microvolt = <0>;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&sys_led>, <&net_led>;
pinctrl-names = "default";
net_led: net-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
};
sys_led: sys-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
};
};
led-controller {
compatible = "pwm-leds";
backlight: backlight-led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_BACKLIGHT;
pwms = <&pwm14 0 1000000 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
cooling-levels = <30 75 135 195 255>;
pwms = <&pwm7 0 40000 0>;
};
rfkill-modem {
compatible = "rfkill-gpio";
label = "M.2 USB Modem";
radio-type = "wwan";
reset-gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
};
vcc0v6_ddr: regulator-vcc0v6-ddr {
compatible = "regulator-fixed";
regulator-name = "vcc0v6_ddr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <600000>;
vin-supply = <&vcc_sysin_b>;
};
vcc_3v3: regulator-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/* pi6c pcie clock generator */
vcc3v3_pi6c: regulator-vcc3v3-pi6c {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_en>;
regulator-name = "vcc3v3_pi6c";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v>;
};
vcc3v3_sd: regulator-vcc3v3-sd {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
regulator-name = "vcc3v3_sd";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3>;
};
/* actually fed by vcc_3v3 */
vcc_3v3_wifi: regulator-vcc-3v3-wifi {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_wifi";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_pi6c>;
};
/* actually fed by bat+ */
vcc_4v0_5g: regulator-vcc-4v0-5g {
compatible = "regulator-fixed";
regulator-name = "vcc_4v0_5g";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
vin-supply = <&vcc3v3_pi6c>;
};
vcc5v: regulator-vcc5v {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en>;
regulator-name = "vcc5v0_usb_otg0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v>;
};
/* sourced from vcc5v and bat+ via rk817 sw5 */
vcc_sysin_b: regulator-vcc-sysin-b {
compatible = "regulator-fixed";
regulator-name = "vcc_sysin_b";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
};
};
&combphy0 {
status = "okay";
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&cpu_thermal {
trips {
cpu_low: cpu-low {
temperature = <40000>;
hysteresis = <5000>;
type = "active";
};
cpu_warm: cpu-warm {
temperature = <50000>;
hysteresis = <5000>;
type = "active";
};
cpu_hot: cpu-hot {
temperature = <60000>;
hysteresis = <3000>;
type = "active";
};
cpu_hall: cpu-hall {
temperature = <70000>;
hysteresis = <2000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&cpu_low>;
cooling-device = <&fan 0 1>;
};
map1 {
trip = <&cpu_warm>;
cooling-device = <&fan 1 2>;
};
map2 {
trip = <&cpu_hot>;
cooling-device = <&fan 2 3>;
};
map3 {
trip = <&cpu_hall>;
cooling-device = <&fan 3 4>;
};
};
};
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
status = "okay";
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sysin_b>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
system-power-controller;
wakeup-source;
#clock-cells = <1>;
vcc1-supply = <&vcc_sysin_b>;
vcc2-supply = <&vcc_sysin_b>;
vcc3-supply = <&vcc_sysin_b>;
vcc4-supply = <&vcc_sysin_b>;
vcc5-supply = <&vcc_sysin_b>;
vcc6-supply = <&vcc_sysin_b>;
vcc7-supply = <&vcc_sysin_b>;
vcc8-supply = <&vcc_sysin_b>;
vcc9-supply = <&dcdc_boost>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_logic";
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_gpu";
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc3v3_sys: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc3v3_sys";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcca_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_image";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_image: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_image";
regulator-state-mem {
regulator-off-in-suspend;
};
};
dcdc_boost: BOOST {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <5400000>;
regulator-name = "dcdc_boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
otg_switch: OTG_SWITCH {
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c5 {
status = "okay";
};
&mdio0 {
rgmii_phy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
pinctrl-names = "default";
pinctrl-0 = <&eth_phy0_reset_pin>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
};
};
&mdio1 {
rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
pinctrl-names = "default";
pinctrl-0 = <&eth_phy1_reset_pin>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
};
};
&pcie2x1 {
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_wifi>;
status = "okay";
};
&pcie30phy {
phy-supply = <&vcc3v3_pi6c>;
data-lanes = <1 2>;
status = "okay";
};
&pcie3x1 {
num-lanes = <1>;
reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_wifi>;
status = "okay";
};
&pcie3x2 {
num-lanes = <1>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc_3v3_wifi>;
status = "okay";
};
&pinctrl {
backlight {
backlight_led_pin: backlight-led-pin {
rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
display {
spi3_display_dc_pin: spi3-display-dc-pin {
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
display_reset_pin: display-reset-pin {
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
net_led_pin: net-led-pin {
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
sys_led_pin: sys-led-pin {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_en: pcie-en {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
spi3 {
spi3_sck: spi3-sck {
rockchip,pins = <4 RK_PC2 2 &pcfg_pull_none>;
};
spi3_mosi: spi3-mosi {
rockchip,pins = <4 RK_PC3 2 &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac0 {
eth_phy0_reset_pin: eth-phy0-reset-pin {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
gmac1 {
eth_phy1_reset_pin: eth-phy1-reset-pin {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcca1v8_pmu>;
vccio5-supply = <&vcc3v3_sys>;
vccio6-supply = <&vcca1v8_pmu>;
vccio7-supply = <&vcc3v3_sys>;
status = "okay";
};
&pwm7 {
pinctrl-0 = <&pwm7_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm14 {
pinctrl-0 = <&pwm14m0_pins>;
pinctrl-names = "default";
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
mmc-hs200-1_8v;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
post-power-on-delay-ms = <800>;
sd-uhs-sdr50;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&spi3 {
pinctrl-names = "default";
pinctrl-0 = <&spi3m1_cs0 &spi3_sck &spi3_mosi>;
status = "okay";
display@0 {
compatible = "galaxycore,gc9307";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi3_display_dc_pin &display_reset_pin>;
dc-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
backlight = <&backlight>;
buswidth = <8>;
rotate = <270>;
};
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc_4v0_5g>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb_otg0>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb_otg0>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb_otg0>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
target/linux/rockchip/image/armv8.mk
+9
View File
@@ -259,6 +259,15 @@ define Device/mmbox_anas3035
endef
TARGET_DEVICES += mmbox_anas3035
define Device/nlnet_xiguapi-v3
DEVICE_VENDOR := NLnet
DEVICE_MODEL := XiGuaPi V3
SOC := rk3568
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-mt7916-firmware wpad-openssl kmod-usb-net-rndis uqmi
endef
TARGET_DEVICES += nlnet_xiguapi-v3
define Device/pine64_rock64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Rock64