eternalwrt/eternalwrt-mt798x
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

realtek: rtl9303: enable PSE on Hasivo S600WP-5GT-2SX-SE

Browse Source 
Wire the HS104 controller (0x0d) on the PSE i2c-gpio bus and attach the
four PoE PHYs (lan1-4) via PHY_C45_PSE; lan5 is not PoE. Add the STC8 LED
MCU (0x4d) with per-port PoE LED triggers, and pull the HS104 PSE and STC8
kmods into the image.

Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/22245
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
This commit is contained in:
Carlo Szelinsky
2026-07-21 18:59:27 +02:00
committed by Jonas Jelonek
parent f728b4af35
commit b3ff21a2ec
2 changed files with 93 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
target/linux/realtek/dts/rtl9303_hasivo_s600wp-5gt-2sx-se.dts
+92 -9
View File
@@ -22,6 +22,9 @@
led-running = &led_sys;
led-upgrade = &led_sys;
label-mac-device = &ethernet0;
i2c0 = &i2c_scl23_sda22;
i2c1 = &i2c_sfp0;
i2c2 = &i2c_sfp1;
};
chosen {
@@ -81,11 +84,7 @@
(RTL93XX_LED_SET_NONE)>;
};
/*
* TODO: I2C bus to the on-board HS104 PSE controller (PoE).
* Defined here for documentation/future use; currently unused
* because PSE/PoE support for this board is not yet wired up.
*/
/* I2C bus to the on-board HS104 PSE controller (PoE) and STC8 LED MCU. */
i2c_scl23_sda22: i2c-scl23-sda22 {
compatible = "i2c-gpio";
#address-cells = <1>;
@@ -93,6 +92,90 @@
scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio0 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
pse0: ethernet-pse@d {
compatible = "hasivo,hs104";
reg = <0x0d>;
poll-interval-ms = <500>;
status = "okay";
pse-pis {
#address-cells = <1>;
#size-cells = <0>;
pse0_pi0: pse-pi@0 {
reg = <0>;
#pse-cells = <0>;
};
pse0_pi1: pse-pi@1 {
reg = <1>;
#pse-cells = <0>;
};
pse0_pi2: pse-pi@2 {
reg = <2>;
#pse-cells = <0>;
};
pse0_pi3: pse-pi@3 {
reg = <3>;
#pse-cells = <0>;
};
};
};
stc8: stc8@4d {
compatible = "hasivo,stc8-mfd", "syscon";
reg = <0x4d>;
#address-cells = <2>;
#size-cells = <0>;
hasivo,execute-bit = <0x40>;
hasivo,execute-bit-registers = <0x01 0x02>;
status = "okay";
led_lan1_poe: led@1,0 {
compatible = "register-bit-led";
reg = <0x01 0x00>;
mask = <0x08>;
color = <LED_COLOR_ID_ORANGE>;
function = "poe";
function-enumerator = <1>;
linux,default-trigger = "pse-0-000d:port0:delivering";
default-state = "off";
};
led_lan2_poe: led@1,1 {
compatible = "register-bit-led";
reg = <0x01 0x01>;
mask = <0x04>;
color = <LED_COLOR_ID_ORANGE>;
function = "poe";
function-enumerator = <2>;
linux,default-trigger = "pse-0-000d:port1:delivering";
default-state = "off";
};
led_lan3_poe: led@1,2 {
compatible = "register-bit-led";
reg = <0x01 0x02>;
mask = <0x02>;
color = <LED_COLOR_ID_ORANGE>;
function = "poe";
function-enumerator = <3>;
linux,default-trigger = "pse-0-000d:port2:delivering";
default-state = "off";
};
led_lan4_poe: led@1,3 {
compatible = "register-bit-led";
reg = <0x01 0x03>;
mask = <0x01>;
color = <LED_COLOR_ID_ORANGE>;
function = "poe";
function-enumerator = <4>;
linux,default-trigger = "pse-0-000d:port3:delivering";
default-state = "off";
};
};
};
i2c_sfp0: i2c-sfp0 {
@@ -226,10 +309,10 @@
&mdio_bus0 {
/* External RTL8221B PHYs */
PHY_C45(0, 1)
PHY_C45(8, 2)
PHY_C45(16, 3)
PHY_C45(20, 4)
PHY_C45_PSE(0, 1, pse0_pi0)
PHY_C45_PSE(8, 2, pse0_pi1)
PHY_C45_PSE(16, 3, pse0_pi2)
PHY_C45_PSE(20, 4, pse0_pi3)
};
&mdio_bus1 {
target/linux/realtek/image/rtl930x.mk
+1
View File
@@ -76,6 +76,7 @@ define Device/hasivo_s600wp-5gt-2sx-se
SOC := rtl9303
DEVICE_VENDOR := Hasivo
DEVICE_MODEL := S600WP-5GT-2SX-SE
DEVICE_PACKAGES := kmod-pse-hasivo-hs104 kmod-mfd-hasivo-stc8
IMAGE_SIZE := 12288k
$(Device/kernel-lzma)
endef