ramips: mt76x8: add support for Cudy LT500 Outdoor v1
Hardware: - SoC: MediaTek MT7628AN - Flash: 16 MiB SPI NOR - RAM: 128 MiB DDR2 - WLAN: 2.4 GHz (MT7628AN, 11n), 5 GHz (MediaTek MT7615E, 11ac) - Ethernet: 1x10/100 Mbps LAN - Buttons: 1 Reset button - LEDs: 8x Green - LTE: internal USB-connected modem Quectel EC200A - Serial Console: unpopulated header 115200 8n1 MAC addresses: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 80:af:ca:xx:xx:x0 | label | | WLAN 2g | 80:af:ca:xx:xx:x0 | label | | WLAN 5g | 80:af:ca:xx:xx:x2 | +2 | +---------+-------------------+-----------+ Migration to OpenWrt: - Download the RSA signed intermediate firmware: `openwrt-ramips-mt76x8-cudy_lt500-outdoor-v1-squashfs-flash.bin` - Connect computer to LAN and flash the intermediate firmware via OEM web interface - OpenWrt is now accessible via 192.168.1.1 Revert back to OEM firmware: - Press the reset button while powering on the device - Connect the LAN port to the PC - Open 192.168.1.1 in a browser and use the wizard to upload and flash OEM firmware image - When recovery process is done, OEM firmware is accessible via 192.168.10.1 again Signed-off-by: rodriguezst <git@rodriguezst.es> Link: https://github.com/openwrt/openwrt/pull/23752 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
rodriguezst
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
d47ce71a89
commit
b5ea3abd60
@@ -0,0 +1,231 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "cudy,lt500-outdoor-v1", "mediatek,mt7628an-soc";
|
||||
model = "Cudy LT500 Outdoor v1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status;
|
||||
led-running = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
label-mac-device = ðernet;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status: status {
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
internet {
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WAN_ONLINE;
|
||||
};
|
||||
|
||||
lan {
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
};
|
||||
|
||||
wifi2g {
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wifi5g {
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
signal1 {
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
label = "green:signal1";
|
||||
};
|
||||
|
||||
signal2 {
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
label = "green:signal2";
|
||||
};
|
||||
|
||||
signal3 {
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
label = "green:signal3";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
pwr {
|
||||
gpio-export,name = "pwr";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb4g {
|
||||
gpio-export,name = "4g";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
eeprom_factory_8000: eeprom@8000 {
|
||||
reg = <0x8000 0x4da8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@fd0000 {
|
||||
label = "debug";
|
||||
reg = <0xfd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "backup";
|
||||
reg = <0xfe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
bdinfo: partition@ff0000 {
|
||||
label = "bdinfo";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_bdinfo_de00: macaddr@de00 {
|
||||
compatible = "mac-base";
|
||||
reg = <0xde00 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xf80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "refclk", "wled_an", "gpio", "spi cs1";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 0>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x3d>;
|
||||
mediatek,portdisable = <0x3e>;
|
||||
};
|
||||
@@ -221,6 +221,18 @@ define Device/cudy_lt400e-v1
|
||||
endef
|
||||
TARGET_DEVICES += cudy_lt400e-v1
|
||||
|
||||
define Device/cudy_lt500-outdoor-v1
|
||||
IMAGE_SIZE := 15872k
|
||||
DEVICE_VENDOR := Cudy
|
||||
DEVICE_MODEL := LT500 Outdoor
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb2 \
|
||||
kmod-usb-ohci kmod-usb-net-cdc-ether kmod-usb-serial-option
|
||||
UIMAGE_NAME := R35
|
||||
SUPPORTED_DEVICES += R35
|
||||
endef
|
||||
TARGET_DEVICES += cudy_lt500-outdoor-v1
|
||||
|
||||
define Device/cudy_m1200-v1
|
||||
IMAGE_SIZE := 15872k
|
||||
DEVICE_VENDOR := Cudy
|
||||
|
||||
@@ -133,6 +133,10 @@ tplink,archer-mr200-v6)
|
||||
ucidef_set_led_netdev "lan" "lan" "white:lan" "eth0"
|
||||
ucidef_set_led_netdev "wan" "wan" "white:wan" "wwan0"
|
||||
;;
|
||||
cudy,lt500-outdoor-v1)
|
||||
ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x01"
|
||||
ucidef_set_led_netdev "internet" "internet" "green:wan-online" "usb0"
|
||||
;;
|
||||
cudy,re1200-outdoor-v1|\
|
||||
mercusys,mb130-4g-v1|\
|
||||
tplink,re200-v2|\
|
||||
|
||||
@@ -213,6 +213,13 @@ ramips_setup_interfaces()
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
|
||||
ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
|
||||
;;
|
||||
cudy,lt500-outdoor-v1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "6@eth0"
|
||||
ucidef_set_interface "wwan" device "usb0" protocol "dhcp"
|
||||
uci add_list firewall.@zone[1].network='wwan'
|
||||
uci add_list firewall.@zone[1].network='wwan6'
|
||||
;;
|
||||
cudy,re1200-outdoor-v1|\
|
||||
tplink,tl-mr3020-v3)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
||||
Reference in New Issue
Block a user