The EAGLE PCIe WiFi card require PCIe0 to be in 2-lanes mode to correctly
work. Add the missing property to enable this mode and restore correctly
functionality of the WiFi card.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The SCU phandle is mandatory to configure PCIe MUX when PCIe 2-lanes mode
is enabled.
Add the missing property where needed.
Fixes: 7d56183d90 ("airoha: replace PCIe x2-mode patch with new pending version")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The current x2-mode patch is mostly an hack ported from Airoha SDK. Replace
with in favor of a new version posted upstream that better implement
handling of reset and configuring x2-mode. This now use the standard
num-lanes property and dedicated PERSTOUT resets exported by the clk
driver.
All the DTS that used x2-mode are updated.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Enable NPU and USB support for Nokia device and apply the correct value for
the shunt-resistor for the i2c ADC chip to correctly read voltage.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that multi serdes patch are accepted upstream, reorder the current
patch in the 1xx numbering and add the kernel version tag.
Also replace the downstream patch with the exact version merged upstream.
Downstream PCS implementation is updated with a new revision for the
ethernet code.
Update any patch affected by these changes.
Link: https://github.com/openwrt/openwrt/pull/23849
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport GDM2 loopback fixup for Ethernet driver. This should be the last
patch before introduction of Multi-Serdes support series.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
While implementing standalone PCS support for DSA, it was found that making
the MAC driver passing the available_pcs array is limiting and problematic
for memory handling and allocation. To better handle this, change the logic
and make phylink allocate the struct and make the MAC driver implement a
function in phylink_config .fill_available_pcs to fill the PCS array.
Update the Airoha and Mediatek driver to reflect this new implementation.
Link: https://github.com/openwrt/openwrt/pull/23413
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Airoha reported some additional bug and fixes were pushed for the ethernet
driver. Backport the additional patch merged upstream and refresh all
affected patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The current code permits support of the standalone PCS feature only for
in-tree kernel module but doesn't correctly support PCS from external
kernel module.
This is caused by the fact that the FWNODE_PCS config flag is internally
selected by any PCS driver and can't be selected directly. This is
problematic for any external kernel module that wants to use the standalone
PCS feature and needs the OPs provided by the generic PCS code.
Moreover compiling the standalone PCS code as a module is problematic and
would cause link error caused by the late PCS code that introduce a
notifier where phylink code depends on.
To address both problem, permit to select the FWNODE_PCS and change it to a
simple bool preventing it to compile as a module.
Link: https://github.com/openwrt/openwrt/pull/23349
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
It was discovered that the internal PHY interrupt are not always connected
and PHY link up/down is not correctly detected.
This is the case of the Nokia Valyrian board that suffer from this problem.
To handle this, drop the internal PHY interrupt property from DTSI and add
it only to the Gemtek W1700K DTS where it was reported to work correctly.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
With new PCS implementation, the pcs property needs to be updated to the
new name of 'pcs-handle' to correctly work with PCS fwnode
consumer/provider.
Fixes: 4d5f579a81 ("airoha: update PCS node in DTSI for new PCS implementation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Update the PCS node in AN7581/AN7583 .dtsi for new PCS implementation.
The #pcs-cell is now needed for the produced/consumer implementation.
Also add entry for USB and PCIe PCS for AN7581 but keep them disabled
by default. USB and PCIe PCS for AN7583 node will be added later once PHY
code will stabilize.
Link: https://github.com/openwrt/openwrt/pull/23271
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Migrate Airoha PCS/Ethernet pending patch to PCS standalone implementation.
This new implementation drop the hack of reading and accessing the dev from
a different device and drop the legacy pcs_create/drop implementation in
favor of fwnode one with a provider/consumer approach.
This is also to sync with the proposed series posted upstream for revision.
The new PCS patch for AN7581 implement full support for USB and PCIe PCS.
Link: https://github.com/openwrt/openwrt/pull/23271
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport phylink_replay_link() API patch from upstream kernel. This is
mostly needed for force_major_config bool in phylink struct needed for new
standalone PCS series.
While at it also rename the current 703 patch to 703-01 as it's part of the
same series merged upstream.
All patch automatically refreshed.
Link: https://github.com/openwrt/openwrt/pull/23271
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Airoha reported some bug in the TX/RX descriptor handling and PPE. Backport
the fix for such bug merged in net staging tree.
It's expected that these patch will be dropped in future minor kernel
version when submitted to stable staging tree.
All affected patch automatically refreshed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The Kite EVB device wrongly select an invalid package for NPU firmware
where the correct one should be the airoha-en7581-npu-firmware one.
Fix the wrong package to restore compilation of the Airoha target.
Fixes: 0cf516751a ("airoha: an7581: generalize eMMC DTS and add Kite variant")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The basic AN7581 NPU FW also supports WiFi offload for MT7992 WiFi chip.
Add this information in the package description to clarify this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport patch merged upstream that optimize the QDMA rx queue descriptor
setup by configuring the CPU IDX only when needed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
It seems that upstream one of the patch had a compilation erro caused by
merging net and net-next and it was fixed silently in a merge commit.
Fix this error in the affected patch.
Fixes: 155c610962 ("airoha: backport additional patch for memory leak and multi-serdes rework")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport upstream memory leak patch merged upstream and even more
preliminary patch for multi-serdes rewrk.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The Airoha AN7581 EVB board switched to full UBI support. Update the
partition table to reflect the new implementation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Generalize the eMMC DTS to common node and add a variant with the Kite WiFi
chip installed. Also rename the eMMC model name and add the Eagle name to
it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add specific DTSI for NPU firmware based on the supported WiFi chip and
update the supported device by including the relevant new DTSI.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport minor fixup merged upstream for Ethernet driver on Offload
Scenario. This is to continue the effort of keeping the Airoha Ethernet
driver synced with the upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop airoha,x2-mode related property from the DTSI and enable them only in
the relevant devices that use a PCIe0 line. x2-mode should be enabled only
for the WiFi card that would use it as it might cause problem for WiFi card
that expect 2 single PCIe x1 line instead of a single PCIe x2 line.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport additional upstream patch in preparation for multi-serdes and
proper PCS support.
Automatically refresh all affected patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport new field_prep()/get() particularly useful to handle case where a
bitmask is not const and FIELD_PREP can't be used. This permit to replace
manual shift with these macro. (also needed to permit backport of some
patch without modification)
Backport reworked patch that drop the local field_prep()/get() macro in
favor of the global one.
Link: https://github.com/openwrt/openwrt/pull/22479
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
While rebasing, a typo was made where the ';;' terminator was omitted in
the 02_network script. Add it to restore script functionality.
Fixes: e210d994fa ("airoha: an7581: add Nokia Valyrian support")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for Nokia Valyrian based on Airoha AN7581 SoC.
Device specification
--------------------
SoC Type: Airoha AN7581
RAM: 2x DDR4 Nanya NT5AD256M16E4-JR (1GB)
Flash: eMMC Macronix MX52LM08A11XVW (1GB)
Ethernet: 3x gigabit via AN7581, 1x 10g via AS21x1x, 1x SFP cage
Wi-Fi: MT7996 - BE19000
LEDs: 11 LED via 2x 74HC595 shift register
Button: Reset, WPS, WiFi
USB ports: 1x 2.0
Miscellaneous: 1x Power Monitor via RTQ6059, 2x FXS port
Device is unfused and is originally flashed with Airoha SDK bootloader
that require signed images.
Bootloader is username/password protected and use the leaked auth combo
that can be found online.
From the bootloadet instruction on how to flash custom bootloader are:
1. mmc erase 0 0x800
2. tftpboot 192.168.1.10:airoha/an7581/openwrt-airoha-an7581-nokia_valyrian-preloader.bin
3. mmc write $loadaddr 0x4 0xfc
4. tftpboot 192.168.1.10:airoha/an7581/openwrt-airoha-an7581-nokia_valyrian-bl31-uboot.fip
5. mmc write $loadaddr 0x100 0x700
It's also possible to use the Emergency Recovery procedure:
From powered OFF device:
1. Keep the reset button pressed (middle button)
2. Power on the device
3. Notice the "Press x" prompt
4. Press x
5. Notice the "C" char waiting for XMODEM load
6. Load the preloader binary with XMODEM protocol
7. Notice the "Press x to load BL31 + U-Boot FIP"
8. Press x
9. Notice the "C" char waiting for XMODEM load
10. Load the fip binary with XMODEM protocol
11. You are now in U-Boot loaded from serial
12. Follow normal procedure to flash bootloader
Due to BOOTROM limitation. the device can't have a standard GPT table
implementation. Because of this fixed-partitions are used to handle this.
U-Boot still doesn't have support for this (it's planned) and currently to flash
and load and image it's needed to write and read from static address in eMMC.
The GPT partition table follow Prpl guidelines with dual partition table with
kernel and rootfs split.
The address for kernel is 0xb00000 and the address for rootfs is 0x1b00000.
Link: https://github.com/openwrt/openwrt/pull/21761
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for Richtek RTQ6056 Current and Power Monitor ADC.
RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
compatible interface, and the device provides full information for
system by reading out the load current and power.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for Airoha EN7581/AN7583 NPU variant firmware present in
linux-firmware. The Airoha EN7581 NPU variant is to support devices
equipped with the MT7996 WiFi chip.
While at it also add an extra new line to follow pattern of double new line to
separate each firmware package.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Due to confusing Documentation, the SPI and SLIC base clock and
register location for Airoha AN7583 SoC were wrong.
Fix them with new updated Documentation source to provide correct
clock support.
Fixes: c5b12fc02a ("airoha: Introduce support for Airoha AN7583 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Align the ipq40xx target to the pattern already used on other devices where
the device DTS are placed in a dedicated directory separate from the files
directory.
This, while trying to enforce a common pattern for every target, also permits to
do modification to device DTS without having to trigger a recompilation of the
entire kernel (as the files directory is not touched)
Link: https://github.com/openwrt/openwrt/pull/22040
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Align the ipq806x target to the pattern already used on other devices where
the device DTS are placed in a dedicated directory separate from the files
directory.
This, while trying to enforce a common pattern for every target, also permits to
do modification to device DTS without having to trigger a recompilation of the
entire kernel (as the files directory is not touched)
Link: https://github.com/openwrt/openwrt/pull/22039
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Align the qualcommbe target to the pattern already used on other devices where
the device DTS are placed in a dedicated directory separate from the files
directory.
This, while trying to enforce a common pattern for every target, also permits to
do modification to device DTS without having to trigger a recompilation of the
entire kernel (as the files directory is not touched)
Link: https://github.com/openwrt/openwrt/pull/22038
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Align the qualcommax target to the pattern already used on other devices where
the device DTS are placed in a dedicated directory separate from the files
directory.
This, while trying to enforce a common pattern for every target, also permits to
do modification to device DTS without having to trigger a recompilation of the
entire kernel (as the files directory is not touched)
Link: https://github.com/openwrt/openwrt/pull/22037
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport patch fixing support for GCC15 caused by __counted_by.
This macro was moved to a different header in recent kernel version and
caused wrong detection on the #ifndef condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending fix for wrong resource_size() usage that cause firmware
crash on load on ath11k.
Refresh all affected patch by this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop all upstreamed patch and refresh all affected patch.
Minor changes were needed to the
350-mac80211-allow-scanning-while-on-radar-channel due to changes in
6.18.
Also some changes were needed to downstream patch due to upstream commit
b74947b4f6ff ("wifi: cfg80211/mac80211: Add support to get radio index")
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add opending patch fixing resource_size(9 if resource start and end is
set to zero.
This is to indirectly fix a helper rework in ath11k qmi code that cause
firmware load panic.
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Commit 8f1914053b ("airoha: replace I2S patch with upstream pending
version") introduced a kernel panic with I2S driver.
Add the fixed patch to fix the kernel panic.
Fixes: 8f1914053b ("airoha: replace I2S patch with upstream pending version")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Enable I2S sound driver and add nodes for eMMC RFB board since it's the
one that always have the I2C codec and can use the sound card.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Replace I2S sound patch with upstream pending version. This adds ETDM
support and fix various bug in the downstream implementation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Instead of using tag name, directly use git commit for the base feed
string if we detect we are generating an SDK from a buildbot (using
CONFIG_BUILDBOT)
This improve security and generates consistent feed.conf.default files
following the pattern used by feeds repository.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
There is currently a logic error with generating the base feed string.
In the scenario where the commit of a Tag match the latest commit of a
stable branch, the stable branch have priority over the tag name.
This results in generating SDK that actually target the branch instead
of the specific tag.
To fix this invert the logic and give priority to the tag name.
Fixes: #18583
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Branch named main was never filter out on parsing the GIT_BRANCH define.
Add main to the name of branch that should be filtered.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Makefile foreach works only on parsing the Makefile and in this specific
case only works if the package is already extracted and file actually
exist.
On scenario where the package still has to be built, foreach doesn't
find any file causing Host/Install to not install any .m4 file.
To handle this, use a shell for loop that scan files in the
Host/install.
Fixes: c820f097e0 ("tools: gnulib: install .m4 file with gl_ prefix")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport upstream patch for C++23 support on ax_cxx_compile_stdcxx.m4.
This is needed by Asterisk package to correctly configure.
It's currently not possible to bump to a more recent autoconf-archive
release 2024.10.16 as it's currently affected by multiple BUGs ([1])
[1] https://github.com/openwrt/openwrt/commit/e1acc7a67b92fa964710afe0a3ae2dad5c1f00c7
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
It was found that there is currently a conflict for the cond.m4 that
is also shipped by automake, making the gnulib one having priority causing
problem with finding AM_CONDITIONAL macro.
To handle this, install gnulib .m4 file with a gl_ prefix to the
filename.
This make sure gnulib .m4 file won't have name conflict with automake
.m4 default files permitting correct autoreconf run of any affected
package by this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move .quilt_used from kernel-defaults.mk to quilt.mk.
This is done to be consistent with the parallel Build/Patch/Default and
Host/Patch/Default and permit better Quilt handling on any package that
might use Kernel/Patch/Default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 61bfcc4bd7.
The change was wrong as it was placed on the wrong define section.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Overwrite default Quilt/Refresh/Package and use the Kernel variant to
correctly refresh bpf-headers patches.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move .quilt_used from kernel-defaults.mk to quilt.mk.
This is done to be consistent with the parallel Build/Patch/Default and
Host/Patch/Default and permit better Quilt handling on any package that
might use Kernel/Patch/Default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Switch to Meson build system and add missing dependency for
libtraceevent-extra.
This switch indirectly fix a compilation error on 32bit target that
weren't getting correct target CFlags. Using Meson fix honour our CFlags
and fix the compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since now we default to 6.12 and we dropped any support for kernel 6.6,
drop any dependency on it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since now we default to 6.12 and we dropped any support for kernel 6.6,
drop any dependency on it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Since now we default to 6.12 and we dropped any support for kernel 6.6,
drop any dependency on it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
MUSL doesn't provide PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP as
it's only glibc and as the MACRO say, it's NP (not portable).
Add patch to check for this and disable overwriting the function
accordingly.
Fixes: 9bdf723476 ("libunistring: update to 1.4.1")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
In implementing APK support it seems a a leftover was never removed that
creates an unused tmp directory in the package feed directory.
Drop it as it's not used anywhere. What is actually needed is the
creation of the $$(PDIR_$(1)) directory for the feed package directory
in the bin/packages directory.
This was a side effect of using INSTALL_DIR on $$(PDIR_$(1))/tmp that
indirectly creates the $$(PDIR_$(1)) parent directory.
Fixes: d788ab376f ("build: add APK package build capabilities")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit cea8507dcc.
This actually cause package pack error on every package outside the
target directory.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
In implementing APK support it seems a a leftover was never removed that
creates an unused tmp directory in the package feed directory.
Drop it as it's not used anywhere.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
New linux version will check the return code of parser on subpartitions.
The only valid case for skipping a parser with an error is -ENOENT.
Change the relevant entry to -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit ade045084b.
Skipping parser for subpartition will be handled now with -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
New linux version will check the return code of parser on subpartitions.
The only valid case for skipping a parser with an error is -ENOENT.
Change the relevant entry to -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit a51359aafd.
Skipping parser for subpartition will be handled now with -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
New linux version will check the return code of parser on subpartitions.
The only valid case for skipping a parser with an error is -ENOENT.
Change the relevant entry to -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 6fa1775348.
Skipping parser for subpartition will be handled now with -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
New linux version will check the return code of parser on subpartitions.
The only valid case for skipping a parser with an error is -ENOENT.
Change the relevant entry to -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 5aab294726.
Skipping parser for subpartition will be handled now with -ENOENT.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Switch to .remove_new for downstream driver that still use the old
.remove to reduce patch delta for 6.12 bump.
Suggested-by: Zhu Yujie <libriunc@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rework each affected mtdsplit driver to make use of -ENOENT error
instead of -ENODEV to handle new kernel that checks error from parser on
subpartitions.
The only acceptable error is -ENOENT that skip the parser. This follow
pattern used upstream and also by an mtdsplit parser, mtdsplit_bcm_wfi,
and also by a workaround currently implemented for mtdsplit_mstc_boot.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 627a0e7da0.
A better solution has been accepted upstream that doesn't hide all
unexpected error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport a trivial patch that half restore original functionality of MTD
parser for subpartition by ignoring if the parser returns -ENOENT.
This fix parsing and booting of some brcm devices.
Link: https://github.com/openwrt/openwrt/pull/20822
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add MODULES_DIR MACRO for provider useful if the relevant package
require to define the default OpenSSL MODULES_PATH.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Replace Airoha AN7583 pinctrl patch with upstream version as it has been
accepted upstream. Add the related kernel version tag to identify it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi