OpenWrt hides verbose output by default,
regardless of automake silent-rules being en-/disabled.
If we enable verbose output for package builds (V=s)
however, we'd like to see as most as possible.
Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 44685
Projects using silent-rules might otherwise fail to compile.
This is due to the following resulting Makefile code:
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
Automake directly uses $(V) for variable name expansion
which fails if $(V) is set to sth. else other than '0' or '1'.
This patch forces automake to not take $(V) into account
but to always use the default config for verbosity.
A better approach would be to actually take $(V) into account,
however not just pass it through (AM_V='$(V)') but
set AM_V to 0 if $V=0 / unset and to 1 otherwise.
This plan however is foiled due to my frustration about
automake as well as my lack of m4 skills.
automake bug report: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=20077
Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 44684
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference
SVN-Revision: 35500
Summary:
* remove all files/* (since merged to upstream)
* patches on nand-spl, mmc and lcd driver
Thanks a lot to Xiangfu Liu!
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
SVN-Revision: 35034
Sysupgrade defines its very own pivot() function.
Prior merging boot.sh and functions.sh sysupgrade just included boot.sh,
now it includes functions.sh which defines pivot() as well, however
slightly different which causes sysupgrade to fail.
This is a hot-fix to unbreak sysupgrade, however those two pivot()
functions should actually get merged.
SVN-Revision: 34815
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
SVN-Revision: 34792
The prefix / causes executables like mount, umount, etc. to be placed
in /bin /sbin which therewith replace the busybox symlinks.
mount and umount e.g. are linked again libmount.so.
This is e.g. fatal during a sysupgrade, where /bin/mount,
/bin/umount, etc. but not libmount.so get copied into a ramdisk
which will result in non working executables within the ramdisk.
SVN-Revision: 34791
Reverting commit 34641.
Function find_mtd_part() is needed by some scripts deployed
for certain targets but not including boot.sh after all.
Still, all this certainly needs some love.
SVN-Revision: 34642
Since all scripts using this function include /lib/functions/boot.sh -
where this function is defined as well - it can be dropped
from /lib/functions.sh. Also avoids further confusion about this
function being declared and defined in two different places.
SVN-Revision: 34641
When selecting a specific eglibc version, it comes with a specific SVN
revision that should not be modified as it (more or less) correspond to
a tagged release. This patch disable the possibility to select a specific
SVN revision on known eglib versions.
This patch also disables the possibility to select the trunk branch of
eglibc. There are multiple reasons for that:
* trunk/HEAD may not even compile
* the OpenWrt built system makes using trunk/HEAD a difficult thing, as
OpenWRT fetches the source tree and store it in a compressed tar archive.
Subsequent build get the source from the tar archive - not from SVN,
making the use of trunk/HEAD largelly innefective.
* we cannot know the corresponding version of trunk/HEAD, meaning that
we'll face compiling issues when we'll try to copy the libc files -
unless the build system is fixed with this specific issue in mind.
Signed-off-by: Emmanuel Deloget <logout@free.fr>
SVN-Revision: 31502
eglibc version number depends on the branch and on the maintenance release
(i.e. the SVN revision). Changing the revision may change the maintenance
version. This patch correlate the SVN revision to the correct version
number - without this change eglibc 2.14 provoke build errors when
building the base-files package (example, for 2.14):
$ make package/base-files/compile V=1
make[1] package/base-files/compile
make[2] -C package/opkg host-compile
make[2] -C package/base-files-network compile
make[2] -C package/base-files compile
cp: cannot stat `/home/me/openwrt/trunk/staging_dir/toolchain-arm_v7-a_gcc-4.6-linaro_eglibc-trunk_eabi/lib/ld-2.14.so': No such file or directory
Signed-off-by: Emmanuel Deloget <logout@free.fr>
SVN-Revision: 31501
This patch makes several changes to the util-linux(-ng) package:
* rename to util-linux (official name now, util-linux-ng got merged)
* bump to last stable version 2.21.1 (was 2.13.0.1 before)
* add several new packages
* sort packages within Makefile
* remove patches which got merged upstream
This patch makes some changes to the e2fsprogs package:
* bump to last stable version 1.42.2
* libraries moved from e2fsprogs to util-linux - take care of that
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31499
The VLAN mapping on the ARV4520PW board is the following:
port on Router: | VLAN in software:
LAN 1 | 3
LAN 2 | 2
LAN 3 | 1
LAN 4 | 0
DSL | 4
So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.
SVN-Revision: 31391
in particular this solves the issue that eglibc version 2.x produced so-files having the version string 2.(x-1) in its names which confused the toolchain
SVN-Revision: 31300
This is needed when compiling with GCC >= 4.7.0 since it doesn't implicitly include 'unistd.h' anymore (needed e.g. for file operations in this particular case)
- Thanks to Luka Perkov
SVN-Revision: 31259
Compiling with -Os results in: "error: #error "glibc cannot be compiled without optimization"
Still, building with -Os is listed as feature in
<http://www.eglibc.org/features>:
""
Building with -Os
EGLIBC supports building the library with compiler optimizing for size -Os instead of for speed -O2.
""
SVN-Revision: 27245
This library contains core functionality usually (but obviously not always)
provided by libc implementations which isneeded by OpenWrt core packages.
For instance the functions 'strlcat', 'strlcpy' are not implemented in
eglibc but needed by hotplug2 (udevtrigger)
SVN-Revision: 27169
Having this file prevents the possibility of having target-specific
fstab config files (as target/linux/${target}/base-files/etc/config/fstab).
There is no need of a non-working example file on the target anyway.
SVN-Revision: 27136
Mirko Vogt