Gunther StammwitzandJonas Jelonek
1ba7b38cfc
The Yuncore 1200F is an outdoor 802.11ac access point based on the MediaTek MT7628AN SoC with an MT7663E PCIe 5 GHz radio. The device is also sold under the KuWFi AP1200F name. Hardware: - SoC: MediaTek MT7628AN - CPU: MIPS 24KEc - RAM: 64 MiB - Flash: 8 MiB SPI NOR - Ethernet: 2x 10/100 Mbps - WiFi 2.4 GHz: MT7628AN WMAC - WiFi 5 GHz: MT7663E PCIe - LEDs: status, LAN, WAN - Button: reset - Watchdog: GPIO watchdog MAC addresses: - Ethernet: factory 0x0004 - 2.4 GHz WiFi: factory 0x0028 - 5 GHz WiFi: factory 0x8004 Network: - LAN: eth0.1, switch port 4 - WAN: eth0.2, switch port 3 Installation: - Build the sysupgrade image: openwrt-ramips-mt76x8-yuncore_1200f-squashfs-sysupgrade.bin - The stock firmware provides a U-Boot recovery web interface. It can be entered by holding the reset button while powering on the device. Connect to http://192.168.0.100/ and upload openwrt-sysupgrade.bin file. Recovery: - Reverting to stock firmware has not been tested. The 5 GHz radio is detected as PCI ID 14c3:7663 and uses mt7615e together with the MT7663 AP firmware. kmod-mt76x2 is explicitly excluded because this board uses MT7663E, not MT76x2. Tested: - Build succeeds for ramips/mt76x8 - Sysupgrade image boots - Ethernet LAN/WAN work - 2.4 GHz AP starts on phy0 - 5 GHz AP starts on phy1 - Stable MAC addresses are assigned to Ethernet, phy0 and phy1 Signed-off-by: Gunther Stammwitz <gstammw@gmx.net> Link: https://github.com/openwrt/openwrt/pull/23613 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0