Matthias UrlichsandRobert Marko
54e70703a0
This commit adds support for the NanoStation Loco M2/M5 XW devices on the ath79 target with test date (label on the packaging, not the device) later than October 2017. To discover whether you have the new version, open a console on the stock web interface and run `dmesg | grep AR803`. New versions print AR8035, v1 shows AR8032. Specifications: - AR9342 (rev 3) SoC @ 535 MHz - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - AR8035 switch - 2T2R 5 GHz radio, 22 dBm - 13 dBi built-in directional antenna - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via TFTP: - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-v2-squashfs-factory.bin MAC addresses: stored on Flash, in the "art" partition. Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Link: https://github.com/openwrt/openwrt/pull/23912 Signed-off-by: Robert Marko <robert.marko@sartura.hr>
33 lines
552 B
Devicetree
33 lines
552 B
Devicetree
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar9342_ubnt_xw_rssileds.dtsi"
|
|
|
|
/ {
|
|
compatible = "ubnt,nanostation-loco-m-xw-v2", "ubnt,xw", "qca,ar9342";
|
|
model = "Ubiquiti Nanostation Loco M (XW) v2";
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
phy4: ethernet-phy@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
|
|
/* default for ar934x, except for 1000M and 10M */
|
|
pll-data = <0x02000000 0x00000101 0x00001313>;
|
|
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&phy4>;
|
|
|
|
gmac-config {
|
|
device = <&gmac>;
|
|
rxd-delay = <3>;
|
|
rxdv-delay = <3>;
|
|
};
|
|
};
|