Use specific SIM path instead of 'any' when unlocking with PIN
code. This fixes PIN unlock issues on devices with multiple modems
where 'any' could select the wrong modem.
Bump modemmanager PKG_RELEASE
Signed-off-by: micpf <micpf@westermo.com>
version 8.3.0 (February 2, 2026):
- Don't use `true` variable (Stanisław Pitucha <stan.pitucha@envato.com>)
- Add VPATH to Makefile.in (saproj <saproj@gmail.com>)
- FileUnopen: always return a valid file descriptor (Jeff Moyer <jmoyer@redhat.com>)
- fix SEGFAULT on early exit with IPv6 enabled (Bjørn Mork <bjorn@mork.no>)
- In AddrsMatch, keep copies of addrinfos to free. (Darren Tucker <dtucker@dtucker.net>)
- Increase buffer size for GSSAPI exchanges (Alexander Bokovoy <abokovoy@redhat.com>)
- Show "(inactive)" rather than an invalid pty device name for ondemand consoles that
are closed. Show "(inactive)" rather than "(null)" for ondemand consoles that have
never been opened. (Greg Becker <becker.greg@att.net>)
- Prevent spy-mode clients from being promoted to the attached/writable state. (Greg Becker <becker.greg@att.net>)
- autoconf upgrade (Jörg Sommer <joerg@jo-so.de>)
- reinitcheck allows time units (Jacek Tomasiak <jtomasiak@arista.com>)
- reduce level of string alloc management debug messages (Greg A. Woods <woods@robohack.ca>)
- fix bug with parser and "#" lines, fix debug output in ParseFile()
- Fix clobbering of breaklist and replstring (Anton Lundin <glance@ac2.se>)
- Use strcmp() rather than strcasecmp() to compare console names when reading the config
file and creating the list of consoles. (Greg Becker <becker.greg@att.net>)
- Added passwordfile config option (Jason Ni <jni@hudson-trading.com>)
Drop upstreamed patches:
002-addrsmatch-freeaddrinfo.patch
002-fix-SEGFAULT-on-early-exit-with-IPv6-enabled.patch
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Some of the X.509 API got retired in 3.0.0 so we should check
against the backward compatibility not being enabled.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
There were 2 missing "$" when options "maxsessions" and "optionsfile"
are checked for some content.
Also the local declaration of "optionsfile" was incorrect.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
For reasons that have not been investigated in detail, the package blocks
during 'postinst' with the new 'apk' backend when the package is installed
on the target.
After much back and forth, it turned out that the '/etc/init.d/ddns start'
command is responsible for this. The call is blocking.
The command '/etc/init.d/ddns enabled' in the 'postinst' also makes no sense
here, as it only checks whether the ddns service is enabled. The return value
is not checked at all. And the 'prerm' script is also not needed, as the
calls made there are implicitly called during package deinstallation.
Therefore, this commit removes the entire and not needed 'postinst' and
'prerm' script call.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This will activate owut in buildbot builds for targets with large flash
by default. This will integrate it into most images by default.
The buildbots already build LuCI with luci-app-attendedsysupgrade. This
adds ucode-mod-uclient and owut to the image.
These are the package sizes for mips_24kc:
29270 bin/packages/mips_24kc/packages/owut-2026.01.13~2526d84b-r1.apk
5449 bin/packages/mips_24kc/base/ucode-mod-uclient-2026.01.31~931bbfeb-r1.apk
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If you're building against 3.0.0 or later and you've defined
OPENSSL_NO_DEPRECATED, this breaks.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* Remote DNS Allow: this additional firewall feature lets selected client devices
temporarily bypass local DNS blocking and use an external, unfiltered DNS resolver.
* LuCI: new Firewall options for remote Access
* readme update
Signed-off-by: Dirk Brenken <dev@brenken.org>
2026-01-30: Version 7.5.4
* Don't return an error code if a binary file is skipped.
Reverting change in 7.5.3.
* Refactored code.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
With mjpg-streamer pending removal [1], it would be nice if we add
a compatible replacement which is under active development.
ustreamer offers a better performance, especially when the
camera supports MJPEG encoding in hardware.
The package already includes OpenWRT support files ./pkg/openwrt
but they needed heavy editing, so it is more efficient to copy
the scripts and configuration, instead of using patches.
Notable changes:
While the init.d script can run in the background when no camera is
connected, it is more efficient to indicate no active instances.
A hotplug script is introduced to start and stop the service when
cameras are added or removed.
If the configured format or encoding are unsupported, a compatible
alternative is automatically selected, so I changed the default
configuration to use MJPEG encoding in hardware for better performance.
HACKS:
MAKE_FLAGS += WITH_SETPROCTITLE=0
is added to workaround the following linker error:
undefined reference to setproctitle_init
This symbol is defined in libbsd, however adding the build dependency
does not resolve the error, because -lbsd is added conditionally, only
when uname -s contains linux. This is unreliable and fails when
cross-compiling on a macOS host. An upstream fix is needed.
An alternative is to use
PKG_UNPACK=$(HOST_TAR) -C $(PKG_BUILD_DIR) --strip=2 -xf $(DL_DIR)/$(PKG_SOURCE)
however this modifies the directory structure, so patches would need
path editing to maintain upstream compatibility.
TODO:
luci-app-mjpg-streamer which is also pending removal [2] is able to
open the HTTP stream from ustreamer. It would be nice to create
luci-app-ustreamer based on that.
[1] https://github.com/openwrt/packages/pull/28344
[2] https://github.com/openwrt/luci/pull/8221
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
When selecting only a package of "no-configure" build variant, e.g.
CONFIG_PACKAGE_zabbix-frontend-server=y
but not any other zabbix package, then the build fails.
The sources are not extracted and the install fails finally with:
make[4]: Entering directory '/srv/openwrt/openwrt-2.git/build_dir/target-arm_arm926ej-s_musl_eabi/zabbix-no-configure/zabbix-7.0.22'
make[4]: *** No rule to make target 'install'. Stop.
make[4]: Leaving directory '/srv/openwrt.git/build_dir/target-arm_arm926ej-s_musl_eabi/zabbix-no-configure/zabbix-7.0.22'
make[3]: *** [Makefile:522: /srv/openwrt.git/build_dir/target-arm_arm926ej-s_musl_eabi/zabbix-no-configure/zabbix-7.0.22/.built] Error 2
This PR fixes this by always running the standard Prepare stage,
but skip the Install one when nothing needs to be compiled.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
This was overlooked. Therefore, the package could not be built.
Fixes: e9fe0249f6 ("ddns-scripts: Fix Hetzner Cloud naming")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Makefile:
* Remove installation of /usr/share/nftables.d/* files as they are no
longer needed
Init script:
* bugfixes/more mature netifd extensions support
* refactor of the nft_file function and global variables it uses
* the "main" atomic nft file now includes creation of pbr chains and jumps
from relevant fw4 chains to pbr chains
* more consistent use of "uplink" wording in the output and variable names
* implement resolver 'wait' call and use it before trying to resolve any
policy entries
* major overhaul of the split uplink case (IPv4-only wan and IPv6-only
wan6), should now create/use a single pbr_wan table for both legacy and
IPv6 routing and the same marking chain
* updates to IDs and text of some error messages (needs luci app update)
* major speed improvements for service stop
* unify the cleanup_* functions into a single cleanup function
* reject creating/additions to nft sets for src_address entries as dnsmasq
doesn't populate sets with local addresses
* minor bugfixes/code cleanups
* refactor processing of WG servers due to split uplink support (thanks
@egc112!)
* clearer (hopefully) argument names for process_interface calls
* small improvements to status_service
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Support building release candidates by setting GO_VERSION_RC to the
release candidate number, e.g. GO_VERSION_RC:=2, and unsetting
GO_VERSION_PATCH.
Signed-off-by: George Sapkin <george@sapk.in>
Add missing 386 and arm64 suffixes to -installsuffix so as not to
accidentally mix incompatible binaries.
Signed-off-by: George Sapkin <george@sapk.in>
* switch from nslookup to resolveip and add dependencey
* fix/use new OutputFormatFilter names for all resolvers
Signed-off-by: Stan Grishin <stangri@melmac.ca>
The error in the #24828 patch series left Kconfig recursive depedency
error on zabbix-frontend-server. We fix this by update the database
depedencies on zabbix-frontend-server. Now, you must select the PHP8
database module you want _before_ zabbix-frontend-server will be
visible in menuconfig.
This is not a big problem, because zabbix-frontend-server already
depends on having php8 slected before the frontend can be built.
Closes: #28458
Signed-off-by: Daniel F. Dickinson <dfdpublic@wildtechgarden.ca>
Due to package renaming the selection of database for the server and
proxy was missing from the Kconfig menu. This caused build failures for
proxy and server.
We now fix that.
Signed-off-by: Daniel F. Dickinson <dfdpublic@wildtechgarden.ca>
Using line continuation (\\) in GNU Make \$(foreach ...) and
\$(call ...) resulted in the install section for many of the packages
not being defined. This resulted in 'skipping [package-name] no install
section' messages and no new package being generated.
We remove the line continuation from the parts foreach and call, in
ordeer to restore compilation and creation of packages.
Signed-off-by: Daniel F. Dickinson <dfdpublic@wildtechgarden.ca>
Introduce a new configuration option - GOLANG_BUILD_BOOTSTRAP - that
defaults to enabled:
- When enabled, build the local bootstrap instead of using an external
one for host Go. If GOLANG_EXTERNAL_BOOTSTRAP_ROOT is set, skip the
initial 1.4 step.
- When disabled, let Go auto-detect the toolchain or use the toolchain
specified in GOLANG_EXTERNAL_BOOTSTRAP_ROOT to skip building the
bootstrap and build host Go using that toolchain directly. Configured
toolchain must be compatible with the current version of Go.
HOST_BUILD_DEPENDS cannot be conditional, so some Makefile juggling is
needed.
Put menu config under bootstrap only.
Remove unnecessary package-related flags from host-only bootstrap.
Signed-off-by: George Sapkin <george@sapk.in>
