Adjust the update error handling path to avoid hard failures on
recoverable errors. This allows ddns to retry updates after the
configured retry interval and improves reliability.
Signed-off-by: Tim Flubshi <flubshi@gmail.com>
Replace manual file loading via cat with json_load_file for parsing
JSON data. This uses the intended helper function and improves
code clarity and robustness.
Signed-off-by: Tim Flubshi <flubshi@gmail.com>
The netcup ddns update script fails on subsequent runs because a
readonly variable is assigned again. Fix this by removing the readonly
declaration to allow repeated execution.
Signed-off-by: Tim Flubshi <flubshi@gmail.com>
Prompted by
https://github.com/openwrt/luci/pull/8420#issuecomment-4071252681
we update upsmon configs to ensure they are correct according to
upstream. We reorder the options so that they match upstream
documentation at
<https://networkupstools.org/docs/man/upsmon.conf.html> to be sure
we have not missed any items.
While at it, we add configuration options from the upstream
documentation that are not currently present in the UCI configs.
Some years ago upstream changed the names the primary/secondary
UPS system/monitor from master/slave to primary/secondary. It
is uncertain how much longer these deprecated names will be
accepted by NUT.
Therefore update naming to match upstream documentation and
configuration. See
<https://networkupstools.org/docs/man/upsmon.html>,
<https://networkupstools.org/docs/man/upsmon.conf.html>, and
<https://networkupstools.org/docs/man/upsd.users.html>.
At the same time, prompted by
https://github.com/openwrt/packages/pull/28875#issuecomment-4079307540
we simplify the configuration and add checks to avoid bad configs
due to misspellings/typos of configuation options by users.
A sample config
config upsmon 'upsmon'
option notifycmd '/usr/bin/logger -t nut-monitor-exec '
config monitor
option type primary
option upsname upsname
option hostname localhost
option username upsuser
option password upspassword
config notifications 'ONLINE'
option message "UPS %s is on line power"
option flag "SYSLOG"
config notifications 'ONBATT'
option message "UPS %s is on battery power"
option flag "SYSLOG+EXEC"
In order to iterate through the notifications, we use named
'notifications' sections and compare the section name to list of
notification events defined by NUT. If they don't match, warn
during initscript startup.
Signed-off-by: Daniel F. Dickinson <dfdpublic@wildtechgarden.ca>
This is a follow-up revert. Since the underlying commit was reverted,
this one must be reverted too to avoid breakage. See commit e46654db2 for context.
This reverts commit f74183a239.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
The pyproject.toml for zope.event 6.1 specifies a strict build
dependency of setuptools>=78.1.1,<81. We currently package
setuptools>=81, causing pip to report a missing dependency and
fail the build.
Add patch 001-relax-setuptools-version.patch to drop the <81 upper
bound, allowing the package to build with any recent setuptools.
Add test.sh to verify the installed version and exercise the core
event API (subscribers list, notify(), event dispatch).
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Following the split of glib2, depend on the more fine-grained packages
to reduce the installed size. Gkrellmd only needs to depend on the core glib2
library, gmodule and gthread, and not on gobject or gio.
Signed-off-by: Peter Denison <openwrt@marshadder.org>
Existing package contains five libraries, some of which are > 1MB. Allow
packages which depend on only some of them to only pull in the ones they
need by splitting this package into finer-grained packages. Transition
can be done piecemeal as depending on glib2 will still pull in all the
libraries.
Signed-off-by: Peter Denison <openwrt@marshadder.org>
Update Makefile with the version
Remove LuaJIT fix patch - No longer needed
Add "ts-time-cb-signature" patch - Fixes build on various platforms
Signed-off-by: Amnon Paz <pazamnon@gmail.com>
This upstream release allows clean builds against linux 6.18. Fix LUA
PacketScript build on 6.18 by switching to ccflags-y and restoring the
required -isystem include path. Remove compat_xtables since the module
no longer exists in 3.30 and drop all dependent kmod references.
Fix CI build failure with backport:
600-xt_pknock-fox-do_div-signness-mismatch.patch
Note that upstream tarball changed from xz to zst.
Signed-off-by: John Audia <therealgraysky@proton.me>
ovpn-dco is currently incompatible with the SafeXcel EIP-197
cryptographic engine. Disable async until this is fixed.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Maintainer: me
Compile tested: x86_64, Dell EMC Edge620, OpenWrt 25.12.1
Run tested: x86_64, Dell EMC Edge620, OpenWrt 25.12.1
Description:Add nftables notrack for localhost traffic
- Removed. License is now included in the main project.
net/https-dns-proxy/Makefile:
- Bumped PKG_RELEASE to 5.
net/https-dns-proxy/files/etc/config/https-dns-proxy:
- Added 'option notrack_dns '1'' to the default configuration.
net/https-dns-proxy/files/etc/init.d/https-dns-proxy:
- Defined NOTRACK_NFT_FILE constant.
- Added 'notrack_dns' and 'notrack_ports' variables.
- Implemented 'notrack_nft' function to manage nftables rules for notracking local DNS traffic.
- Enabled loading of 'notrack_dns' boolean from configuration.
- Modified start_instance to collect listen_port into notrack_ports if notrack_dns is enabled.
- Modified start_service to call notrack_nft update/remove based on notrack_dns and collected ports.
- Modified stop_service to call notrack_nft remove.
- Updated service_started and service_stopped to trigger firewall config changes when notrack_dns is enabled.
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Add --no-build-isolation to PYTHON_SETUP_ARGS. Without it, pip creates
an isolated build environment which fails during cross-compilation
because _sysconfigdata is missing for the target arch.
Add test.sh verifying python3-sepolgen module loads correctly and
selinux-audit2allow binary is functional.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Add HOST_PYTHON3_PIP_VARS and --no-build-isolation to MAKE_VARS.
Without --no-build-isolation, pip creates an isolated build environment
which fails during cross-compilation because _sysconfigdata is missing.
Aligns with python-selinux which already has this fix.
The libsemanage pywrap uses the host Python's EXT_SUFFIX to name the
C extension, so we will use the PYCEXT env-var to correct that.
Add basic test.sh to verify the semanage Python bindings load correctly
in environments without SELinux kernel support.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Add --no-build-isolation to PYTHON_SETUP_ARGS. Without it, pip creates
an isolated build environment which fails during cross-compilation
because _sysconfigdata is missing for the target arch.
Add test.sh with basic import and API sanity checks.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
* Switch Hagezi URL to a more compact higher-level only domains list as we
prefer it anyways and there's less processing (thanks @dave14305)
* When update_config_sizes is unset, save collected sizes to RAM to improve
luci app performance (thanks @sshaikh)
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Valkey is a community fork of the key-value database Redis.
It is a drop in replacement to Redis so most of the files are
derived from their Redis equivalent.
Co-authored-by: George Sapkin <george@sapk.in>
Signed-off-by: Matthew Cather <mattbob4@gmail.com>
fix: avoid unnecessary dnsmasq restarts (thanks @egc112)
fix: insert, not add dns policies to ensure higher priority than the DNS
hijack rules (thanks @egc112)
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Major changes since 3.10.0:
4.0:
- add CORS_ALLOW_PRIVATE_NETWORK setting for Local Network Access spec support
- add async middleware support, reducing overhead on async views
- remove deprecated CORS_REPLACE_HTTPS_REFERER and CorsPostCsrfMiddleware
- remove three header names from default allowed list (accept-encoding, dnt, origin)
4.3:
- fix access-control-allow-credentials header not being omitted on
non-allowed responses
4.6:
- drop support for Django 3.2 through 4.1
4.9:
- add Django 6.0 support
- tighten validation of sequence-type settings (e.g. CORS_ALLOW_METHODS)
Add PYPI_SOURCE_NAME:=django_cors_headers as the 4.x sdist uses
underscores in the filename.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Changelog since 0.9.6.1:
- add product version number to the PRODID tag in iCalendar output
- add support for GEO tags in vCards
- various bugfixes and compatibility improvements
Also need to update setup.cfg at build time to insert the version
to allow the package to build.
Otherwise we get
```
2026-04-21T08:17:17.9341927Z File "/builder/staging_dir/hostpkg/lib/python3.14/site-packages/setuptools/config/setupcfg.py", line 296, in __setitem__
2026-04-21T08:17:17.9342520Z parsed = self.parsers.get(option_name, lambda x: x)(value)
2026-04-21T08:17:17.9343117Z File "/builder/staging_dir/hostpkg/lib/python3.14/site-packages/setuptools/config/setupcfg.py", line 602, in _parse_version
2026-04-21T08:17:17.9343777Z return expand.version(self._parse_attr(value, self.package_dir, self.root_dir))
2026-04-21T08:17:17.9344201Z ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2026-04-21T08:17:17.9344938Z File "/builder/staging_dir/hostpkg/lib/python3.14/site-packages/setuptools/config/setupcfg.py", line 421, in _parse_attr
2026-04-21T08:17:17.9345544Z return expand.read_attr(attr_desc, package_dir, root_dir)
2026-04-21T08:17:17.9345876Z ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
2026-04-21T08:17:17.9346409Z File "/builder/staging_dir/hostpkg/lib/python3.14/site-packages/setuptools/config/expand.py", line 191, in read_attr
2026-04-21T08:17:17.9346947Z return getattr(module, attr_name)
2026-04-21T08:17:17.9347261Z AttributeError: module 'vobject' has no attribute 'VERSION'
2026-04-21T08:17:17.9598878Z
```
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Patch release with stability and correctness fixes over 2.4.3:
- fix memory leak in certain array creation paths
- fix thread-safety issues in ufunc dispatch
- fix hash collisions in np.isin() on certain inputs
- fix OpenBLAS threading hang on ARM targets
- miscellaneous annotation and documentation improvements
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
* flock/serialize the etag writing in the f_etag function
* added various variables to local scope
* LuCI: removed needless ACL
Signed-off-by: Dirk Brenken <dev@brenken.org>
Tim Flubshi