zhao/bl-mt798x
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mt7986: add glinet gl-mt6000 support (#43)

Browse Source 
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
2024-01-05 20:03:19 +08:00
committed by GitHub
parent bcb1b03e2e
commit a2fa9d37f4
5 changed files with 463 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
atf-20220606-637ba581b/configs/mt7986_glinet_gl-mt6000_defconfig Normal file
View File

@@ -0,0 +1,4 @@
CONFIG_PLAT_MT7986=y
CONFIG_TARGET_FIP_NO_SEC_BOOT=y
CONFIG_FLASH_DEVICE_EMMC=y
CONFIG_DRAM_DDR4=y

135
uboot-mtk-20220606/arch/arm/dts/mt7986a-glinet_gl-mt6000.dts Normal file
View File

@@ -0,0 +1,135 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include "mt7986.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7986-glinet_gl-mt6000";
compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "white:system";
system_led = "blue:run";
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_run: led-0 {
label = "blue:run";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-1 {
label = "white:system";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "sgmii";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_default>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
status = "okay";
};
&pinctrl {
mmc0_pins_default: mmc0default {
mux {
function = "flash";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <MTK_DRIVE_6mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
conf-dsl {
pins = "EMMC_DSL";
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "disabled";
};

84
uboot-mtk-20220606/configs/mt7986_glinet_gl-mt6000_defconfig Normal file
View File

@@ -0,0 +1,84 @@
CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_SYS_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80000
CONFIG_ENV_OFFSET=0x400000
CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet_gl-mt6000"
CONFIG_TARGET_MT7986=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MT7986_BOOTMENU_EMMC=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7986a-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_POLLER=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="MT7986> "
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_DM=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPT_RENAME=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_READ=y
CONFIG_CMD_TFTPPUT=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_LED_BLINK=y
CONFIG_CMD_SMC=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_GL_BTN=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_ENV_IMPORT_FDT=y
CONFIG_ARP_TIMEOUT=1000
CONFIG_NET_RETRY_COUNT=3
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_MTK=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7986=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_FAT_WRITE=y
CONFIG_HEXDUMP=y
# CONFIG_EFI_LOADER is not set
CONFIG_WEBUI_FAILSAFE=y

145
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7986a-glinet_gl-mt6000.dts Normal file
View File

@@ -0,0 +1,145 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include "mt7986.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7986-glinet_gl-mt6000";
compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "white:system";
system_led = "blue:run";
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_run: led-0 {
label = "blue:run";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-1 {
label = "white:system";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
bl2_verify {
bl2_compatible = "emmc";
};
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_default>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
status = "okay";
};
&pinctrl {
mmc0_pins_default: mmc0default {
mux {
function = "flash";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <MTK_DRIVE_6mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
conf-dsl {
pins = "EMMC_DSL";
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <MTK_DRIVE_4mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "disabled";
};

95
uboot-mtk-20230718-09eda825/configs/mt7986_glinet_gl-mt6000_defconfig Normal file
View File

@@ -0,0 +1,95 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80000
CONFIG_ENV_OFFSET=0x400000
CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet_gl-mt6000"
CONFIG_SYS_PROMPT="MT7986> "
CONFIG_TARGET_MT7986=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_PCI=y
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MTK_BOOTMENU_MMC=y
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_FIP_VERIFY is not set
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7986a-emmc-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPT_RENAME=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_READ=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_GL_BTN=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_MTK=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7986=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_FAT_WRITE=y
CONFIG_HEXDUMP=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
# CONFIG_EFI_LOADER is not set