zhao/bl-mt798x
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

uboot-202307: add mt798x boards

Browse Source
This commit is contained in:
hanwckf
2023-08-31 00:47:15 +08:00
parent 64a667af15
commit cf724632be
22 changed files with 2386 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

125
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-360t7.dts Normal file
View File

@@ -0,0 +1,125 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-360-t7";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "red:run";
system_led = "green:system";
};
gpio-keys {
compatible = "gpio-keys";
reset-button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
mesh-button {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "green:system";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "red:run";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

125
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-cetron_ct3003.dts Normal file
View File

@@ -0,0 +1,125 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-cetron_ct3003";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "red:status";
system_led = "green:status";
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
button-mesh {
label = "mesh";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
status_red_led: led-0 {
label = "red:status";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
status_green_led: led-1 {
label = "green:status";
linux,code = <BTN_9>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

158
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-clt-r30b1.dts Normal file
View File

@@ -0,0 +1,158 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-clt-r30b1";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "green:network";
system_led = "blue:system";
};
mtd-layout {
layout@0 {
label = "default";
// mtd layout for clt_r30b1 stock ubi or openwrt-stock/immortalwrt-stock firmware
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(BL2),512k(u-boot-env),2048k(Factory),2048k(FIP),64M(ubi),32M(data)";
};
layout@1 {
label = "immortalwrt-112m";
// mtd layout for immortalwrt/openwrt 112M ubi firmware
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(BL2),512k(u-boot-env),2048k(Factory),2048k(FIP),112M(ubi)";
};
layout@2 {
label = "qwrt";
// mtd layout for lean qwrt
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(BL2),512k(u-boot-env),2048k(Factory),2048k(FIP),1024k(rsv0),110M(ubi)";
};
};
gpio-keys {
compatible = "gpio-keys";
reset-button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
mesh-button {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "blue:system";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "green:system";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "blue:network";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led@3 {
label = "green:network";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

130
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-cmcc-rax3000m.dts Normal file
View File

@@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-cmcc-rax3000m";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "blue:system";
system_led = "green:system";
};
gpio-keys {
compatible = "gpio-keys";
reset-button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
mesh-button {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "red:system";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "green:system";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "blue:system";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

140
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-imou_lc-hx3001.dts Normal file
View File

@@ -0,0 +1,140 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-imou_lc-hx3001";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "green:power";
system_led = "green:power";
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
button-mesh {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
power_led: led-0 {
label = "green:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led-1 {
label = "green:wlan";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
led-2 {
label = "red:wan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
led-3 {
label = "green:wan";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
led-4 {
label = "green:lan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

125
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-jcg_q30.dts Normal file
View File

@@ -0,0 +1,125 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-jcg_q30";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "red:status";
system_led = "blue:status";
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
button-mesh {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
status_red_led: led-0 {
label = "red:status";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
status_blue_led: led-1 {
label = "blue:status";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

130
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-konka_komi-a31.dts Normal file
View File

@@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-konka_komi-a31";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "red:system";
system_led = "blue:system";
};
gpio-keys {
compatible = "gpio-keys";
reset-button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
mesh-button {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "green:system";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "blue:system";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "red:system";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

153
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-livinet_zr-3020.dts Normal file
View File

@@ -0,0 +1,153 @@
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-livinet_zr-3020";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "red:d8";
system_led = "green:upgrade";
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
button-mesh {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
label = "red:d8";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
led-1 {
label = "blue:internet";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
running_led: led-2 {
label = "blue:running";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
upgrade_led: led-3 {
label = "green:upgrade";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
boot_led: led-4 {
label = "red:boot";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led-6 {
label = "blue:d7";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
led-7 {
label = "blue:wlan2g";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
};
led-8 {
label = "blue:wlan5g";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

163
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981-wr30u.dts Normal file
View File

@@ -0,0 +1,163 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "mt7981.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7981-xiaomi-wr30u";
compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
blink_led = "yellow:network";
system_led = "blue:system";
};
mtd-layout {
layout@0 {
label = "default";
// mtd layout for xiaomi stock ubi or openwrt-stock/immortalwrt-stock firmware
cmdline = "console=ttyS0,115200n1 loglevel=8 swiotlb=512 firmware=0 mtd=ubi uart_en=1";
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),34816k(ubi_kernel),79872k(ubi),256k(KF)";
boot_part = "ubi_kernel"; // ubi boot part, default is "ubi"
factory_part = "ubi_kernel"; // factory firmware write part, default is "ubi"
sysupgrade_kernel_ubipart = "ubi_kernel"; // sysupgrade kernel write part (ubi volume: kernel), default is "ubi"
sysupgrade_rootfs_ubipart = "ubi"; // sysupgrade rootfs write part (ubi volume: rootfs, rootfs_data)
};
layout@1 {
label = "immortalwrt-112m";
// mtd layout for immortalwrt/openwrt 112M ubi firmware
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),112m(ubi),256k(KF)";
};
layout@2 {
label = "qwrt";
// mtd layout for lean qwrt
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),1024k(rsv0),110m(ubi)";
};
};
gpio-keys {
compatible = "gpio-keys";
reset-button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
mesh-button {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "blue:system";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "yellow:system";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "blue:network";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
led@3 {
label = "yellow:network";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000>;
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

1
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7981.dtsi
View File

@@ -9,6 +9,7 @@
#include <dt-bindings/clock/mt7981-clk.h>
#include <dt-bindings/reset/mt7629-reset.h>
#include <dt-bindings/pinctrl/mt65xx.h>
#include <dt-bindings/input/linux-event-codes.h>
/ {
compatible = "mediatek,mt7981";

1
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7986.dtsi
View File

@@ -10,6 +10,7 @@
#include <dt-bindings/clock/mt7986-clk.h>
#include <dt-bindings/reset/mt7629-reset.h>
#include <dt-bindings/pinctrl/mt65xx.h>
#include <dt-bindings/input/linux-event-codes.h>
/ {
compatible = "mediatek,mt7986";

130
uboot-mtk-20230718-09eda825/arch/arm/dts/mt7986a-redmi-ax6000.dts Normal file
View File

@@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "mt7986.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "mt7986-redmi-ax6000";
compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", "mt7986-redmi-ax6000";
chosen {
stdout-path = &uart0;
tick-timer = &timer0;
};
config {
bootcmd = "mtkboardboot";
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
mtd-layout {
layout@0 {
label = "default";
// mtd layout for xiaomi stock ubi or openwrt-stock/immortalwrt-stock firmware
cmdline = "console=ttyS0,115200n1 loglevel=8 firmware=0 uart_en=1";
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),30720k(ubi_kernel),81920k(ubi)";
boot_part = "ubi_kernel"; // ubi boot part, default is "ubi"
factory_part = "ubi_kernel"; // factory firmware write part, default is "ubi"
sysupgrade_kernel_ubipart = "ubi_kernel"; // sysupgrade kernel write part (ubi volume: kernel), default is "ubi"
sysupgrade_rootfs_ubipart = "ubi"; // sysupgrade rootfs write part (ubi volume: rootfs, rootfs_data)
};
layout@1 {
label = "immortalwrt-110m";
// mtd layout for immortalwrt/openwrt 110M ubi firmware
mtdids = "nmbm0=nmbm0";
mtdparts = "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),110m(ubi)";
};
};
gpio-keys {
compatible = "gpio-keys";
reset-button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
mesh-button {
label = "mesh";
linux,code = <BTN_9>;
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
};
bl2_verify {
bl2_compatible = "spim-nand";
};
};
&uart0 {
status = "okay";
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
spi_flash_pins: spi0-pins-func-1 {
mux {
function = "flash";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
must_tx;
enhance_timing;
dma_ext;
ipm_design;
support_quad;
tick_dly = <2>;
sample_sel = <0>;
spi_nand@0 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <52000000>;
};
};
&watchdog {
status = "disabled";
};

100
uboot-mtk-20230718-09eda825/configs/mt7981_360t7_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-360t7"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(bl2),512k(u-boot-env),2048k(factory),2048k(fip),108M(ubi),1M(stock-config),512k(stock-factory),4M(stock-log)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_cetron_ct3003_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-cetron_ct3003"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(BL2),512k(u-boot-env),1024k(art),1024k(Factory),2048k(FIP),113152k(ubi)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_clt_r30b1_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-clt-r30b1"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(BL2),512k(u-boot-env),2048k(Factory),2048k(FIP),64M(ubi),32M(data)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_cmcc_rax3000m_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-rax3000m"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(bl2),512k(u-boot-env),2048k(factory),2048k(fip),114M(ubi)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

101
uboot-mtk-20230718-09eda825/configs/mt7981_imou_lc-hx3001_defconfig Normal file
View File

@@ -0,0 +1,101 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-imou_lc-hx3001"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(BL2),512k(u-boot-env),2048k(factory),2048k(fip),117248k(ubi)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_NET_FORCE_IPADDR=y
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_jcg_q30_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-jcg_q30"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(BL2),512k(u-boot-env),2048k(Factory),2048k(FIP),113152k(ubi)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_konka_komi-a31_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-konka_komi-a31"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(bl2),512k(u-boot-env),2048k(factory),2048k(fip),114688k(ubi)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_livinet_zr-3020_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-livinet_zr-3020"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(BL2),512k(u-boot-env),2048k(Factory),2048k(FIP),65536k(ubi),32768k(firmware_backup),1024k(zrsave),1024k(config2)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

100
uboot-mtk-20230718-09eda825/configs/mt7981_wr30u_defconfig Normal file
View File

@@ -0,0 +1,100 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7981-wr30u"
CONFIG_SYS_PROMPT="MT7981> "
CONFIG_TARGET_MT7981=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7981-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_PWM=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),112m(ubi),256k(KF)"
CONFIG_CMD_GL_BTN=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7981=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_PWM=y
CONFIG_PWM_MTK=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y

104
uboot-mtk-20230718-09eda825/configs/mt7986_redmi_ax6000_defconfig Normal file
View File

@@ -0,0 +1,104 @@
CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="mt7986a-redmi-ax6000"
CONFIG_SYS_PROMPT="MT7986> "
CONFIG_TARGET_MT7986=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
CONFIG_MEDIATEK_BOOTMENU=y
CONFIG_MEDIATEK_BOOTMENU_DELAY=3
CONFIG_MTK_WEB_FAILSAFE=y
CONFIG_MTK_WEB_FAILSAFE_AFTER_BOOT_FAILURE=y
CONFIG_MTK_UBI_SUPPORT=y
CONFIG_MTK_UPGRADE_BL2_VERIFY=y
# CONFIG_MTK_UPGRADE_IMAGE_VERIFY is not set
CONFIG_ENABLE_NAND_NMBM=y
CONFIG_FIT=y
CONFIG_AUTOBOOT_MENU_SHOW=y
CONFIG_AUTOBOOT_MENU_MTK_SHOW=y
CONFIG_DEFAULT_FDT_FILE="mt7986a-spim-nand-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NMBM=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nmbm0=nmbm0"
CONFIG_MTDPARTS_DEFAULT="nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),112640k(ubi)"
CONFIG_CMD_GL_BTN=y
CONFIG_DOS_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MTD=y
CONFIG_ENV_MTD_NAME="u-boot-env"
CONFIG_ENV_SIZE_REDUND=0x80000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.1.1"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.1.2"
CONFIG_PROT_TCP=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_GPIO=y
CONFIG_CLK=y
# CONFIG_I2C is not set
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_MTK=y
CONFIG_DM_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7986=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MTK_SPIM=y
CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_HEXDUMP=y
# CONFIG_EFI_LOADER is not set