Add DTSI files defining EDMA, PPE, and UNIPHY nodes for the new PPE
driver bindings on IPQ5018, IPQ6018 and IPQ8074 platforms.
IPQ5018 requires a patch for UNIPHY node as its cmn PLL node is upstream.
These replace the existing NSS-DP ones.
Signed-off-by: John Crispin <john@phrozen.org>
[IPQ5018]
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
[IPQ6018 and IPQ8074]
Link: https://github.com/openwrt/openwrt/pull/22381
Signed-off-by: Robert Marko <robimarko@gmail.com>
proto/dhcp.sh hardcoded `-t 0` (infinite retries) with no way
for UCI / operator to tune per-retry interval (udhcpc -T),
retry count (udhcpc -t) or failure retry-loop wait (udhcpc -A).
Add three new proto config ints (timeout, retry, tryagain)
and thread them into the udhcpc command line. Unset options
preserve existing behaviour: retry defaults to 0, timeout and
tryagain are omitted so udhcpc uses its own RFC defaults.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When bridge VLAN filtering is active, network_get_physdev resolves
UCI interface names to the VLAN sub-interface (e.g. br-lanv0) rather
than the bridge master. LLDP frames use reserved multicast
(01:80:c2:00:00:0e) which bridges trap to member ports, so lldpd
must listen on the physical ports to receive them.
Detect when the resolved device is a sub-interface of a bridge and
expand it to the list of bridge member ports instead.
Signed-off-by: John Crispin <john@phrozen.org>
Only print VHT/HE/EHT center frequency and channel width fields
when they are actually populated. This avoids displaying undefined
values for non-6GHz HE results where channel info is derived from
VHT/HT Operation IEs. Also fix center_chan_2 format specifier from
%s to %d.
Signed-off-by: John Crispin <john@phrozen.org>
Add a proto_dhcp_restart() handler that re-acquires the DHCP lease via a
single ubus call, releasing the previous lease and triggering a fresh
DHCPDISCOVER without bouncing the interface.
The re-acquire is implemented by sending SIGHUP to udhcpc, which releases
the current lease (if any) and immediately transitions the state machine
to INIT_SELECTING so the next main-loop iteration sends a fresh
DHCPDISCOVER. A single signal thus expresses 'release this lease and get
a new one' without exiting the client, so upstream watchdogs (e.g. a
DNS-health monitor) can request a clean re-lease without tearing down the
interface.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The supplicant config generator read eap_type and auth from UCI for
internal logic but never wrote the corresponding eap= and phase2=
directives to the wpa_supplicant config.
Fix by:
- Generating eap= and phase2= from eap_type/auth for PEAP/TTLS/FAST/TLS
- Adding eap and phase2 to the network_append_vars output list
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
cell.he was only populated when the 6 GHz Operation Information
sub-element was parsed, making HE invisible to scan results on
2.4/5 GHz bands. Fix this by setting cell.he unconditionally when
HE Operation IE (Extension Element 36) is seen.
Gate 6 GHz channel width parsing on cell.band rather than the HE
Operation Parameters bit field, which proved unreliable on MediaTek
firmware. Fix flag byte offsets in the 6 GHz path: VHT Oper Info
Present (BIT 14) and Co-Hosted BSS (BIT 15) are in byte 1 of
he_oper_params which maps to ext[2], not ext[1].
For non-6GHz bands, derive channel width from the already-parsed
VHT/HT Operation IEs instead of leaving cell.he empty.
Signed-off-by: John Crispin <john@phrozen.org>
The unet CLI's join handler used the joiner's --network value as the
local network name, so an unspecified --network fell back to the
literal 'unet'. The inviter typically uses a different name (e.g.
ucoord_<venue>), so the two sides ended up keyed differently and any
upper layer subscribing to the network-named unetmsg channel never
saw each other.
The inviter now passes enroll_info={ network } to enroll_start so
the inviter's network name rides along in enroll_meta. The joiner
prefers data.enroll_meta?.network when present, falling back to its
own --network value for backwards compatibility with older inviters.
Signed-off-by: John Crispin <john@phrozen.org>
Replace exit(1) on every failure path with return null so callers that
iterate over multiple radios can collect results from the radios that
did succeed instead of aborting on the first one that refuses an
off-channel scan.
Route diagnostics to stderr via warn() so stdout stays clean for
callers parsing JSON output, and include the device name in each
message to disambiguate per-radio failures.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add IPQ8074 support to the upstream CMN PLL driver. The CMN PLL block
is identical to IPQ6018 with the same output clocks (bias_pll_cc_clk
at 300 MHz and bias_pll_nss_noc_clk at 416.5 MHz).
Signed-off-by: John Crispin <john@phrozen.org>
Add IPQ6018 support to the upstream CMN PLL driver. The CMN PLL at
0x9b000 generates the 12 GHz base clock feeding the networking
subsystem. Its output clocks (bias_pll_cc_clk at 300 MHz and
bias_pll_nss_noc_clk at 416.5 MHz) replace the previous fixed-clock
stubs and are found by GCC via global clock name lookup.
Signed-off-by: John Crispin <john@phrozen.org>
The XO clock source is always-on in hardware and cannot be gated.
Without CLK_IS_CRITICAL, the CMN PLL runtime PM suspend cascades a
disable up to gcc_xo_clk_src, causing a branch status timeout warning.
The IPQ8074 GCC driver already marks this clock as critical.
Signed-off-by: John Crispin <john@phrozen.org>
Allow callers of edit_create_destroy to pass additional named arguments
via info.named_args that get merged into the create command parameters.
Signed-off-by: John Crispin <john@phrozen.org>
When a remote peer's connection drops (device powered off, unetmsgd
crash, network failure), network_rx_cleanup_state silently removed
the remote publish/subscribe handles without notifying local
subscribers. This meant local clients had no way to detect that a
remote peer had disappeared.
Call handle_publish for each channel where a remote publish handle
is removed during connection cleanup, so local subscribers receive
the publisher change notification and can react accordingly.
Signed-off-by: John Crispin <john@phrozen.org>
Check /var/run/uci/ before /etc/config/ so that overlay configs
also trigger service reload events.
The overlay directory takes precedence, and uci show already handles
merging overlay + base configuration correctly.
Signed-off-by: John Crispin <john@phrozen.org>
Extend the taxonomy subsystem to capture the complete association frame
in addition to the existing probe and association IE data.
This adds a new assoc_frame_taxonomy field to struct sta_info and exposes
it via the get_sta_ies ubus method as a base64-encoded "assoc_frame" field.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Extend the hostapd_rrm_beacon_req ubus method to support the optional
reporting_detail parameter as defined in IEEE 802.11-2016 section 9.4.2.21.7.
Also fix missing assignment operators (=) in the beacon_req_policy array
initialisation.
Signed-off-by: John Crispin <john@phrozen.org>
Moved interface discovery and data population into an exported update()
function that can be called on-demand to refresh wireless interface
information. This allows using iwinfo.uc as a library inside daemons.
Signed-off-by: John Crispin <john@phrozen.org>
Add U-Boot build for the ASUS ZenWiFi BT8 intended to replace the
stock loader.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Other than most boards with DDR4 the ASUS ZenWiFi BT8 cannot use the
"comb" DDR calibration option and needs only the "ddr4" option set
instead.
Build TF-A SPIM-NAND with UBI as well as to boot from RAM with
mtk_uartboot for MT7988 with DDR4 RAM.
Signed-off-by: John Crispin <john@phrozen.org>
Hardware
--------
MediaTek MT7988D SoC (3x Cortex-A73 @1.8 GHz max)
1GB DDR4 RAM
128MB SPI-NAND (Winbond)
MediaTek MT7996 BE14000 Tri-Band Wi-Fi 7
3x LAN (2x 1GE MT7988 built-in, 1x 2.5GE MaxLinear GPY211C)
1x WAN (2.5GE MT7988 built-in)
LED: RGB PWM (supported as 3x PWM LED)
USB: 1x USB 3
Buttons: RESET, WPS
UART: 115200 8N1 3.3V
Installation
------------
1. Hold down RESET button and power on the device until
LED pulses red.
2. Assign IP 192.168.1.70/24 to your computer's Ethernet port
3. Connect Ethernet to one of the 1GE LAN ports
4. Open browser and visit http://192.168.1.1
5. Upload openwrt-mediatek-filogic-asus_zenwifi-bt8-factory.bin
6. Once OpenWrt initramfs system comes up, do sysupgrade using
openwrt-mediatek-filogic-asus_zenwifi-bt8-squashfs-sysupgrade.bin
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This reverts commit 1cea889c96.
This reverts commit 5fd86d66c1.
The patch is causing build servers to fail. Revert it for now.
Signed-off-by: John Crispin <john@phrozen.org>
93458ac dns: fix response to TYPE_PTR query
68af311 fix unicast response port and timeout
a2b4979 service: announce all services in single dns answer
4537734 display announced services in ubus call umdns browse
0b50c29 display more srv attributes in output of ubus browse function
Signed-off-by: John Crispin <john@phrozen.org>
e2f05de state: set_stdio: chdir back to / in case of failure
30542c9 inittab: Disable implicit controlling TTY.
Signed-off-by: John Crispin <john@phrozen.org>
Rename jffs2reset to factoryreset. Convert all scripts to using the new command
line. Print a deprecation notice when jffs2reset is invoked.
49d36ba jffs2reset: rename to factoryreset
b135064 jffs2reset: print deprecation message
Signed-off-by: John Crispin <john@phrozen.org>
The boot LED on OpenWrt One is PWM driven and sets the pattern trigger as the
default inside its devicetree.
Signed-off-by: John Crispin <john@phrozen.org>
Add an ucode based re-implementation of the shell script based wifi code.
The new code is jsonschema driven. The code has been refactored into several
files making it easier to follow.
The new scripts are also way faster than the previous sh implementation.
The new code is currently opt-in via WIFI_SCRIPTS_UCODE and defaults to
EXPERIMENTAL.
Signed-off-by: John Crispin <john@phrozen.org>
Add an ucode based re-implementation of iwinfo. The tool behaves like the old
one with a few minor output differences. It is now possible to add -j to any
command resulting in JSON output.
The new code is currently opt-in via WIFI_SCRIPTS_UCODE and defaults to
EXPERIMENTAL.
Signed-off-by: John Crispin <john@phrozen.org>
b0b5d93 Merge pull request #234 from IdWV/fs
60e7a88 Merge pull request #232 from sebastianertz/lib-digest
1752779 digest: implement compile time option to exclude less common algorithms
c7268a1 ci: include libmd in MacOS CI builds
fcb6f70 lib: introduce digest library
1323a27 Merge pull request #246 from jow-/fix-upvalue-resolve
ed5ce8f types: resolve upvalue values in arrays and objects
a6e0641 vm: resolve upvalues before pushing them onto the stack
ef1baab ci: drop OpenWrt tests for now
63e18ea fs: eliminate the usage of global variables
b1bd7b5 types: add ucv_resource_create() helper
3408edf Merge pull request #244 from nbd168/nl80211
8af77e7 nl80211: add new attributes for multi-radio support
1423ad7 nl80211: cover extended feature and EHT rate info attributes
ee1d6d8 Merge pull request #237 from sebastianertz/math
4b18a9b Merge pull request #213 from jow-/improve-vector-macros
1f022c0 math: removed global variable for thread safety
e5fe6b1 treewide: refactor vector usage code
20307ee utils: improve vector utilities
aa18952 Merge pull request #241 from jow-/socket-local-fanout-decl
79ccd9c socket: provide local definition of `struct fanout_args`
402280d Merge pull request #239 from jow-/safe-insert-during-obj-iteration
07afe96 Merge pull request #240 from jow-/stricter-number-conversion
736d450 types: fix potential use after free on adding keys during iteration
4134e71 vallist: more thoroughly check for trailing garbage after numeric string
9cf53dd Merge pull request #226 from jow-/lexer-improvements
2b2e732 lexer: make api functions public
855854f lexer: emit comment and template statement block tokens
328a50f lexer: improve token position reporting
fa22732 Merge pull request #225 from jow-/compiler-fix-keyword-property-labels-after-spread
6e88c62 Merge pull request #224 from jow-/lib-fs-readline-leak
94d1211 compiler: properly treat property names after spread expressions
67cd123 fs: fix potential memory leak on i/o errors in .read()
Signed-off-by: John Crispin <john@phrozen.org>
Use and alternate ubus object when the config contains "driver=wired". This
commit is in preparation of the ieee8021x-wired daemon.
Signed-off-by: John Crispin <john@phrozen.org>
This allows a radius server to send AVPs for client rate control inside the
accept message. Further add the ratelimits to the sta-authorized ubus
notification.
Signed-off-by: John Crispin <john@phrozen.org>
* add a UCI option to disable all LEDs.
* add an init.d parameter to blink all LEDs
* add on/off parameters to init.d
Signed-off-by: John Crispin <john@phrozen.org>
Mass production units will get 16 assigned MAC addresses. This allows each phy
to spawn up to 7 VAPs which will each have unique MAC without needing the
private bit.
Signed-off-by: John Crispin <john@phrozen.org>
Mass production units will get 16 assigned MAC addresses. This allows each phy
to spawn up to 7 VAPs which will each have unique MAC without needing the
private bit.
Signed-off-by: John Crispin <john@phrozen.org>
This tool will load the uboot environment to /var/run/uboot-env/. This allows
more efficient use when accessing multiple variables.
Signed-off-by: John Crispin <john@phrozen.org>
fbaca4b cache: improve update call by doing a full refresh probe
93c9036 dns: reply to A/AAAA questions for additional hostnames
Signed-off-by: John Crispin <john@phrozen.org>
714e419 iwinfo: fix EHT mode reporting for STA interfaces
7eed433 devices: add device id for MediaTek MT7996e
Signed-off-by: John Crispin <john@phrozen.org>
filogic: Add support for D-Link AQUILA PRO AI M30
Specification:
- MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
- 1GB RAM
- 16MB NOR
- 128MB NAND
- 3 LEDs (red, green, blue, white)
- 2 buttons (reset, user defined)
- 1 2.5Gbit WAN port (Airoha EN8811h)
- 1 1Gbit LAN ports
- 1 single lane M.2 SSD slot
- 1 mikroBus socket
- externel HW WDT (25s refresh time)
- i2c RTC (with battery backup)
Serial Interface
- UBS-C CDC-ACM
- 3 Pins GND, RX, TX
- Settings: 115200, 8N1
MAC addresses are not populated on the early samples.
Signed-off-by: John Crispin <john@phrozen.org>
This makes it possible to avoid using a RADIUS server for WPA enterprise authentication
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Linksys E8450, also known as Belkin RT3200, is a dual-band
IEEE 802.11bgn/ac/ax router based on MediaTek MT7622BV and
MediaTek MT7915AN chips.
FCC: K7S-03571 and K7S-03572
Hardware highlights:
- CPU: MediaTek MT7622BV (2x ARM Cortex-A53 @ 1350 MHz max.)
- RAM: 512MB DDR3
- Flash: 128MB SPI-NAND (2k+64)
- Ethernet: MT7531BE switch with 5 1000Base-T ports
CPU port connected with 2500Base-X
- WiFi 2.4 GHz: 802.11bgn 4T4R built-in antennas
MT7622VB built-in
- WiFi 5 GHz: 802.11ac/ax 4T4R built-in antennas
MT7915AN chip on-board via PCIe
MT7975AN front-end
- Buttons: Reset and WPS
- LEDS: 3 user controllable LEDs, 4 wired to switch
- USB: USB2.0, single port
- no Bluetooth (supported by SoC, not wired on board)
- Serial: JST PH 2.0MM 6 Pin connector inside device
----_____________----
[ GND RX - TX - - ]
---------------------
- JTAG: unpopulated ARM JTAG 20-pin connector (works)
This commit adds support for the device in a way that is compatible
with the vendor firmware's bootloader and dual-boot flash layout, the
resulting image can directly be flashed using the vendor firmware.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When hostapd gets restarted to often/quickly will cause procd to not restart it
anymore. it will think that hapd is in a crash loop.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [adjust respawn time]
In this new setup the switch is treated as wan, lan1.100 is used as
our mgmt vlan.
The board mac is applied to eth0, switch and switch.1
The board mac is assigned with the LA bit set to all lan ports while
incrementing it.
Signed-off-by: John Crispin <john@phrozen.org>
