The conditional runtime dependency on the ip package was originally
intended to only pull in the ip package when busybox ip is not
configured. However, in APK-based builds the BUSYBOX_CONFIG_*
variables may not be resolvable at package metadata generation
time, causing the ip dependency to be unconditionally baked into
the .apk package. This forces users to install ip-tiny or ip-full
even though busybox already provides the ip command.
Revert to the previous +@BUSYBOX_CONFIG_IP / +@BUSYBOX_CONFIG_FEATURE_IP_LINK
kconfig-level dependencies. These ensure busybox ip support is
enabled at config time without creating a runtime package dependency.
Both options default to y, and wireguard.uc only uses basic
ip link commands that busybox fully supports.
Fixes: openwrt#22637
Signed-off-by: Anand Kumar <anandvtu16158@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22652
Signed-off-by: Robert Marko <robimarko@gmail.com>
Like the PHY_C22() macro before add a helper that allows to define
a C45 based phy. It works basically the same with two parameters
PHY_C45(port_number, bus_address) where
- port_number is the absolute overall unique phy number
- bus_address is the location of the phy on the bus
As a first consumer adapt the Xikestor SKS8300-8T devicetree.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22715
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport minor fixup merged upstream for Ethernet driver on Offload
Scenario. This is to continue the effort of keeping the Airoha Ethernet
driver synced with the upstream version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The fib_entries attribute is a device specific constant.
Therefore move it into the configuration structure. Add
a comment why someone used 16K fib_entries for RTL931x
instead of the possible 32K.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22438
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
We patch DMA_BUF to make it tristate, so once ALL_KMODS is selected it will
be built as a module even if previously disabled in the config.
So, since IO_URING_ZCRX does not depend on DMA_BUF linking will fail with:
aarch64-openwrt-linux-musl-ld: Unexpected GOT/PLT entries detected!
aarch64-openwrt-linux-musl-ld: Unexpected run-time procedure linkages detected!
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.o: in function `io_release_dmabuf':
io_uring/zcrx.c:94:(.text+0x20): undefined reference to `dma_buf_unmap_attachment_unlocked'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:97:(.text+0x30): undefined reference to `dma_buf_detach'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:99:(.text+0x3c): undefined reference to `dma_buf_put'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.o: in function `io_import_dmabuf':
io_uring/zcrx.c:125:(.text+0x1b20): undefined reference to `dma_buf_get'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:132:(.text+0x1b34): undefined reference to `dma_buf_attach'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:139:(.text+0x1b48): undefined reference to `dma_buf_map_attachment_unlocked'
make[6]: *** [scripts/Makefile.vmlinux:72: vmlinux.unstripped] Error 1
So, lets use IS_REACHABLE() to check for CONFIG_DMA_SHARED_BUFFER instead
to avoid adding a dependency to CONFIG_DMA_SHARED_BUFFER.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The board is exactly identical to the ASUS RT-AX52, I've literally not changed a single thing.
Only AX52 is AX1800, PRO is AX3000.
SOC: MediaTek MT7981b
RAM: 256MB DDR3
FLASH: 128MB SPI-NAND (Winbond W25N01GV)
WIFI: Mediatek MT7981b DBDC 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531 Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not ocnnect VCC)
Use the compiled asus_rt-ax52-pro-initramfs.trx file from the this repo.
Connect the PC via LAN to one of the yellow router ports and wait until your PC to get a DHCP lease.
Browse to http://192.168.50.1 or http://www.asusrouter.com/
If your router is brand new, finish the setup process and log into the Web-UI.
Navigate to Administration → Firmware Upgrade or use this link http://www.asusrouter.com/Advanced_FirmwareUpgrade_Content.asp.
Upload the .trx file to router
Wait for it to reboot
trx image is initramfs version. You must upgrade to squashfs version.
Browse to http://192.168.1.1/cgi-bin/luci/admin/system/flash
Upload asus_rt-ax52-pro-squashfs-sysupgrade.bin and use sysupgrade -n
Wait for it to reboot
SSH to 192.168.1.1 and set a root password, or browse to http://192.168.1.1
-------Revert to stock asus firmware ---------:
1: Download the rt-ax52 firmware from ASUS official website. Save the firmware to tftp server directory and rename to RT-AX52.trx
2: Connect the PC with TFTP server to the RT-AX52. Set a static ip on the ethernet interface of your PC. (ip address: 192.168.1.70, subnet mask:255.255.255.0)
3: Conect to the serial console, power on again, interrupt the autoboot process by pressing '4' when prompted. $ ubi remove linux
$ ubi remove jffs2
$ ubi remove rootfs
$ ubi remove rootfs_data
$ ubi create linux 0x45fe000
$ reset
then the dut will reboot,interrupt the autoboot process by pressing '2' when prompted. 2: Load System code then write to Flash via TFTP.
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) $: enter y
you will see the follow, type enter directly:
Input device IP (192.168.1.1) ==:
Input server IP (192.168.1.70) ==:
Input Linux Kernel filename (RT-AX52.trx) ==:
4: wait for the device run up
Signed-off-by: Emre Yavuzalp <emreyavuzalp2@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21905
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Realtek target currently uses two phy macros to simplify the
device dts.
- EXTERNAL_PHY() to denote a phy attached to the SoC
- INTERNAL_PHY() to denote an internal PHY (inside the SoC)
There is no benefit doing this. The topology around a port/phy is
well defined by the port macros. They link port, phy, pcs and even
leds. The only consumer of the attribute "phy-is-integrated" is
inside the dsa driver and that is being refactored.
As a first step define a new more meaningful PHY_C22() macro that
describes a c22 capable phy. This does not need to care about the
external/internal relation. To make it even more useful for the
RTL93xx targets with multiple mdio busses give it two parameters
PHY_C22(port_number, bus_address) where
- port_number is the absolute overall unique phy number
- bus_address is the location of the phy on the bus
For RTL83xx these two parameters will usually be the same. Instead
of three steps (inventing the macro, converting the consumers and
removeing the old macor) do a one-step conversion for the existing
EXTERNAL_PHY() macro.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22698
Signed-off-by: Robert Marko <robimarko@gmail.com>
The dsa driver currently has different attributes to denote what
hardware is around a port:
- phy_is_integrated: true if phy is not driven by a serdes
- phy: the type of the attached phy (e.g. 0=NONE, 2=RTL8218B, ....)
- pcs: link to a serdes pcs instance
This is somehow redundant and especially the phy type should be only
part of the phy driver and is not needed by the dsa driver at all.
Remove the redundancy by simply keeping a boolean attribute "phy" that
flags a phy driven port and can be used similar to the pcs (pointer)
attribute. With that the driver can check phy/pcs as follows:
- if (ports[i].pcs) -> port has a dedicated serdes
- if (ports[i].phy) -> port has a dedicated phy
That implemented, the "phy-is-integrated" attribute of a phy can be
removed from the dts. This will be a separate commit. As a side effect
the following (annoying) boot message for kernel 6.18 gets fixed.
OF: /switchcore@1b000000/mdio-controller/mdio-bus@0/ethernet-phy@24:
Read of boolean property 'sfp' with a value.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22698
Signed-off-by: Robert Marko <robimarko@gmail.com>
In kernel 6.18, upstream added a change to the Aquantia PHY driver which
reports autoneg and inband capabilities as the PHY supports it, and
configures it accordingly in the PHY [1]. Due to how phylink works, it
then decides to turn off in-band signalling and prefer outband signalling
via MDIO.
We do not fully support running a USXGMII link with disabled
autonegotiation which leads to a non-working link between RTL93xx switch
and Aquantia PHYs running on USXGMII. To workaround this issue until
this support is added (if it is properly supported by the hardware),
force the Aquantia PHYs on affected devices to use inband signalling
instead of outband signalling. To achieve this, one can add
> managed = "in-band-status";
to the port definition in the DTS.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5d59109d47c00e3e98aba612529b3871e69efb9d
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch the common DTS for Zyxel XGS1250-12 variants to the recently
added SWITCH_PORT_LED macro to reduce boilerplate and make the DTS
cleaner. As a side effect, this also assign labels to the port nodes so
they can be referenced by the variant-specific device tree sources.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22690
Signed-off-by: Robert Marko <robimarko@gmail.com>
Introduce fix which prevents the kernel from crashing in case the mxl862xx
driver fails to probe due to outdated firmware running on the switch.
Cancel all pending work and prevent rescheduling of counter polling in case
the driver errors out during probe.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add the RTL8231 controlling the port LEDs to the devicetree, so users
can enable them. Using the appropriate link name, the netdev trigger can
be used to reflect the port status. As no hardware port status
offloading is supported, blinking on traffic could result in increased
load due to the numerous LED updates.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
To enable the use of the RTL8231 to control (port) LEDs, the driver
needs to be enabled in the build. Incorporate it into the kernel, so any
LED consumers also work in failsafe mode.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Add a pinctrl-single node to the switch GPIO/LED control register that
disables the port LED peripheral when selected. When an RTL8231 is
instantiated, this is required to prevent the user config from being
overwritten by the peripheral.
As this is technically not a pin mux operation, but rather a peripheral
disable, using pinctrl-single for this purpose is bit of a hack, but it
does the job.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
It may be possible that the bootloader has left an RTL8231 expander
configured for synchronous operation, which requires the user to signal
that the new GPIO/LED states should be latched.
As drivers typically perform one operation at a time for the higher
level kernel framework, this would require a latch on every update,
which is not very useful. Disable synchronous operation to keeps things
simple.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
The allocated regmap_field object is not stored as a const reference, so
the helper function allocating the object should not return it as such.
Drop 'const' so the build doesn't complain about discarding the
qualifier.
Fixes: 6ef6014887 ("realtek: Add pinctrl support for RTL8231")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
The loop scanning the available toggle rates would stop when the
requested interval exceeded the tested interval. Since the intervals are
searched from small to large, this would always trigger on the shortest
interval, or skip to the largest interval for small requested values.
To correctly clamp (ceil) the toggle rate, the loop needs to continue
until the condition is met, instead of breaking the loop.
Fixes: 6ef6014887 ("realtek: Add pinctrl support for RTL8231")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
The code in 800-gpio-regmap-Bypass-cache-for-shadowed-outputs.patch
was accepted upstream as commit 897396b418d1 ("gpio: regmap: Bypass
cache for aliased inputs"). Update the filename to reflect the first
release containing this change.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
