Fix execution of initramfs image on Huawei AP5030DN and AP6010DN by
increasing available memory for LZMA extraction by the loader.
The default leaves only ~23.6 MB between the decompression target
and the running loader code. Extracting images with built-in
packages lead to overwriting the loader code. This causes
the decompression to produce garbage output and hang.
Fix this by overwriting LZMA_TEXT_START to increase the
available memory for LZMA extraction to ~39.6 MB.
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
Link: https://github.com/openwrt/openwrt/pull/22581
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Netgear GS110TPP uses an RTL8214C to drive ports 9 and 10. The
DTS is missing the corresponding serdes assignment. From looking at
[1] it seems to be connected to pins 82-85 (serdes 2). Add that
definition. With that the last improper use of SWITCH_PORT() macro
is sorted out.
Remark: I do not own this device. The patch just resembles what
the picture [1] shows.
[1] https://svanheule.net/switches/_media/wiki/gs110tpp-top.jpg
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22232
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport additional upstream patch in preparation for multi-serdes and
proper PCS support.
Automatically refresh all affected patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
LAN969x DTS was finally merged upstream, so lets backport the backported
DTS instead of keeping a local copy.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tactical 1000 has per per port RS0 and RS1 pins, however internally they
are tied together.
So, model them as RS0 at least.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
FIPS 140-3 recommends that all crypto implementations should be tested
before first use. Testmanager performs initial tests based on existing
test vectors. Not all algorithms have defined test vectors, so to improve
this situation, this commit backports recently added test vectors for
following cipher suites:
* authenc(hmac(md5),cbc(des))
* authenc(hmac(md5),cbc(aes))
* authenc(hmac(sha1),rfc3686(ctr(aes)))
* authenc(hmac(sha224),rfc3686(ctr(aes)))
* authenc(hmac(sha256),rfc3686(ctr(aes)))
* authenc(hmac(sha384),rfc3686(ctr(aes)))
* authenc(hmac(sha512),rfc3686(ctr(aes)))
These vectors were calculated using a software implementation and then
double-checked on Mediatek MT7981/MT7986 (safexcel) and NXP P2020 (talitos).
Both platforms passed self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/22409
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch adds support for the following AEAD ciphersuites:
- authenc(hmac(md5),cbc(aes))
- authenc(hmac(md5),cbc(des)))
- authenc(hmac(md5),cbc(des3_ede))
- authenc(hmac(md5),rfc3686(ctr(aes)))
These algorithms are used mainly for backward compatibility with some
older equipment. This is enhanced version of the patch found in the
mtk-openwrt-feeds repo.
All cipher suites were tested using test vectors on the MediaTek MT7981,
MT7986, and MT7988.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/22410
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Use a patched fork while waiting for
https://github.com/anthropics/claude-code-action/pull/963 to be
merged and released upstream.
Version v1.0.77 contains many improvments over 1.0.49 which was used
before. It uses Sonnet 4.6 instead of Sonnet 4.5.
Fixes: c0e75c9de6 ("github: add Claude code review workflow triggered by /claude comment")
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Until now the driver determines the validity of a phy (or port)
by checking "smi_bus[] < 0". That is somehow confusing. Align
with upstream and add a valid_port bitmask that can be used for
this check with common kernel bit operations.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22565
Signed-off-by: Robert Marko <robimarko@gmail.com>
The mdio driver has come a long way. The code is
quite stable now and whenever bugs are analyzed
one can look at the registers with devmem from
command line. Drop unneeded debugging information.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22565
Signed-off-by: Robert Marko <robimarko@gmail.com>
a665659dee50 wifi: mt76: fix beacon monitor for MBSSID nontransmitted BSS
1b26f5f63d42 wifi: mt76: mt7996: Decrement sta counter removing the link in mt7996_mac_reset_sta_iter()
0c1dedac48c3 wifi: mt76: mt7996: Switch deflink to seclink only if link lookup does not fail
7fa21be01b97 wifi: mt76: mt7996: Rely on msta_link link_id in mt7996_vif_link_remove()
492a407111c3 wifi: mt76: mt7996: Account active links in valid_links fields
ade83e44eda0 wifi: mt76: mt7996: Move mlink deallocation in mt7996_vif_link_remove()
efebeea5c058 wifi: mt76: mt7996: Destroy vif active links in mt7996_remove_interface()
a4c790aef40d wifi: mt76: mt7996: Add mcu APIs to enable/disable vif links.
018f60316d4d wifi: mt76: mt7996: Destroy active sta links in mt7996_mac_sta_remove()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Modern gawk rejects C-style /* ... */ comments in AWK code, treating
them as regex patterns where '*' has nothing to quantify. Replace all
such comments with AWK-style '#' comments in lantiq_bdi_conf.awk and
lantiq_ram_init_uart.awk.
Also replace the pattern 'if (x) /* comment */ else action' which used
a C comment as a null statement with the equivalent 'if (!x) action'.
Fixes build error:
awk: error: ? * + or {interval} not preceded by valid subpattern
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22458
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Without a prompt the action auto-detected mode: tag instead of agent
when triggered via issue_comment, resulting in no review being posted.
Remove the prompt so the action can correctly use its built-in agent
mode with full PR context.
Fixes: c0e75c9de6 ("github: add Claude code review workflow triggered by /claude comment")
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
lantiq_gswip and tag_gswip were not loaded during failsafe, leaving the
switch uninitialised. This caused LAN1 port to show no link, making
SSH-based recovery impossible.
Add the autoload flag and include tag_gswip (which was also missing from
the autoload list) so the switch initialises correctly in failsafe mode.
Tested on BT HomeHub 5A (lantiq/xrx200).
Fixes: https://github.com/openwrt/openwrt/issues/22480
Signed-off-by: Benjamin Levine <benjaminmileslevine@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The claude-code-action uses mcp__github_ci__get_ci_status and related
tools to check workflow run status as part of the review. Without
actions: read the GitHub API calls for CI status are rejected.
Fixes: c0e75c9de6 ("github: add Claude code review workflow triggered by /claude comment")
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The whitelist was too restrictive, causing permission denials when
Claude tried to use basic tools like Read or Grep to analyse the diff.
Remove it and let the action use its default toolset.
Fixes: c0e75c9de6 ("github: add Claude code review workflow triggered by /claude comment")
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add claude-code-review.yml using anthropics/claude-code-action@v1.
The review runs when a PR comment containing "/claude" is posted,
avoiding unnecessary API usage on every push.
Uses issue_comment trigger restricted to PR comments only. Only
triggers for users with write access (OWNER, MEMBER, COLLABORATOR)
and when the comment body contains "/claude", preventing any runner
from being allocated for unrelated comments. A short domain hint
steers the review toward OpenWrt embedded Linux conventions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22556
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit backports 2 patches that add gpio controller support
to RTL9607C SoCs. It enables us to make use of anything that
can be controlled by GPIO on RTL9607C, like LEDs, buttons and such.
Signed-off-by: Rustam Adilov <adilov@tutamail.com>
Link: https://github.com/openwrt/openwrt/pull/22358
Signed-off-by: Robert Marko <robimarko@gmail.com>
Certain versions of the VF2 bootloader require the presence of a
vf2_uEnv.txt in the boot partition to properly load a non-SDK kernel.
Add this file during the SD-card generation.
Known VF2 bootloader versions exhibiting this behaviour are:
U-Boot 2021.10 (Mar 31 2025 - 22:49:46 +0800), Build: jenkins-github_visionfive2_6.12-11
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
The VF2 boards store their ubootenv on /dev/mtd1 which is a SPI flash
partition. Add support for reading this partition in uboot-envtools,
and add the package into the VF2 image.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Upstream 2b81db8a7f4475e141a8ffd7cc745ed9f15962df introduced several new
symbols. This commit adds them and also applies alphabetical order via
./scripts/kconfig.pl target/linux/generic/config-6.12
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22276
Signed-off-by: Robert Marko <robimarko@gmail.com>
RTL93xx devices can no longer find the switch node in the DTS.
Commit 4c92254 ("relocate/retype switch node") refactored the
switch node definition to better align with upstream. Sadly
the redefinition for RTL93xx devices failed.
- RTL83xx: use "switch0: ethernet-switch"
- RTL93xx: use "switch0: switch@1b000000"
Follow up commit 8b969f7 ("drop realtek,smi-address property)
changed the dts lookup sequence for mdio initialization. On
RTL93xx devices it cannot find the switchnode via
of_get_child_by_name(dev->of_node->parent, "ethernet-switch")
Fix the switch node type for RTL93xx
Fixes: 8b969f7 ("drop realtek,smi-address property)
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22557
Signed-off-by: Robert Marko <robimarko@gmail.com>
Tianling Shen
